I just replaced 2 front stabilizer links and it was easy. You have to jack up both wheels make sure you take off both front tires makes it easier too work on take the top nut off on link by stabilizer bar first if you break it off dont worry its ok then take off bottom nut from the frame where the link goes thru put in new link tighten bottom nut first then tighten top nut dont over tighten top nut to much just enough that the threaded shaft is about a 1 1/4 inches above the nut do the same on the other side.
Sway bars are installed by removing your factory end links and sway bar. Re-install the new bushings and position your new sway bar on the vehicle in the OEM location and secure it with the same bolts.
1,708 views
Usually answered in minutes!
×