Question about 2002 Pontiac Montana

1 Answer

2002 pontiac montana, switched out origional radio for an exact replica, but now is in locked position. I tried holding 1and 3 button etc. nothing happens, stays in LOCKED position

Posted by envirocid on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 32 Answers

Im gona need your cars code then i can help but ebay also sells them for 5 bucks

Posted on Apr 02, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How can I unlock the theft lock?


try to do reset procedures.
1. remove positive power cable from battery
2. wait for 5 minutes
3.while waiting for 5 minutes switch on all possible accessory,like ignition,internal lighting,headlights,hazzard,A/C,open all door,step on brake pedals
4. after doing procedure #3 ,switch off all the above mentioned accessories
5.install back the positive power cable to your battery
hopefully this should reset your anit theft system to normal

Sep 05, 2015 | 2006 Pontiac Montana SV6

1 Answer

The radio in my 2000 Pontiac Montana says locked


1. Turn the ignition ON (The radio should display "LOC")
2. Hold down the Radio Presets 2 and 3 buttons for six seconds
3. The radio display changes from LOC to a three-digit number. Write this number down. You now have fifteen seconds to complete the next step.
4. Press the AM/FM button
5. The radio display changes to another three-digit number. Write this number to the right of the first one.
6. You now have a six-digit number, the first three digits are from STEP 03 and the last three digits are form STEP 05
7. Call 1-800-537-5140 (talk to a machine)
8. Press 1 then # (pound). You'll hear "Invalid Code, try again"
9. Press 139010 or 106010 or 206010 or 202107 then # (pound). You will be asked to enter your four or six digit code followed by *
10. Enter the number from STEP 6 then *
11. Listen to the four-digit number and write it down. It will be repeated twice
12. Turn the ignition ON (The radio displays LOC)
13. Use the MN and HR buttons to enter the code from STEP 11
14. Press the AM/FM button. The radio display changes to "SEC". Your radio is now "un-locked" and usable.
15.



Dealership Codes
202108
206053
620529

Sep 23, 2014 | 2000 Pontiac Montana

1 Answer

Wipers only work on high on 2002 pontiac montana and stop in any position when turned off


sounds like the wiper switch is bad try that and see if that dont fix it.

Sep 27, 2011 | 2002 Pontiac Montana

2 Answers

My car radio says locked I know the code how do I unlock the radio


The code goes in exactly how you would set the clock.If the code is correct the radio will unlock. It should be a 4 digit code.If its the 6 digit that is the code that needs to called into to GM for the 4 digit code.

Aug 03, 2010 | 1996 Pontiac Grand Am

1 Answer

2002 pontiac montana wont start battery tested good vehicle completely dead no lights, radio, etc. Ground connection good termenals clean. Would alternator be the next thing to try???


no Alternator wont stop it from starting or rolling over as long as good battery...try connections on starter..that would be what i looked for first

Mar 05, 2010 | 2002 Pontiac Montana

1 Answer

Hi i have a pontiac montana 2002 and my radio is lock


the dealer can give you the code with vin number

Mar 02, 2010 | 2002 Pontiac Montana

1 Answer

Pontiac montana wiper reterned in up right after


While wipers off in parked position, remove wiper arm and re-position arm to correct stowed position.
Re-tighten any wiper arm attachment nuts/screws etc.
Check wiper attachment arm for damage or cracks at the spigot mount. Replace if damaged.

Jan 21, 2010 | 2002 Pontiac Montana

1 Answer

How do i reprogramme the keyless entry for pontiac montana 2009


IMPORTANT: Before entering programming mode, have in possession all of the transmitters you will be using on the vehicle. Once you program the transmitter, all previous codes will be erased from the memory. The other transmitters will not be functional until you program the transmitters again.
1. Close all vehicle doors.
2. Insert the key into the ignition.
3. Hold down the power UNLOCK button on the driver’s door panel-continue to hold down until instructed to release.
4. Perform steps 5 through 8 in fairly rapid succession.
5. Turn the ignition switch to the ON position (as far as you can go without starting the engine).
6. Turn the ignition switch to the OFF position.
7. Turn the ignition switch to the ON position.
8. Turn the ignition switch to the OFF position.
9. Release the power unlock button on the door panel. The vehicle will lock and unlock the doors automatically.
10. Hold down the LOCK and UNLOCK buttons on the transmitter simultaneously until the door locks and unlocks. This step may take up to 30 seconds.
11. Repeat the previous step for each additional transmitter (including any existing transmitters).

Nov 18, 2009 | 2006 Pontiac Montana SV6

Not finding what you are looking for?
2002 Pontiac Montana Logo

Related Topics:

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...