I unlocked to passenger side door with the set of keys without remote and alarm went off. i got my key with the remote to shut alarm off. now car wont start at all. All the electrical stuff works it just wont start.. pls help!
An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: car alarm went off while unlocking the door, now
You need to reset alarm/immobiliser.lock car with remote, hold button down for 30 secs,then press/hold down unlock button,should reset.another way is with key in ignition/turned on, press alarm button down and hold for 30 secs.this resets immobiliser.toyota
systems vary..depending on market.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The alarm must of activated , the alarm is controlled by the locks, go to passenger door and use the key to lock and then unlock the door, this will shut down alarm, you may have to use the passenger door to shut down alarm due to a bad switch in drivers door, this will allow you to start the car, you can also not lock door and alarm may not arm. let me know if the passenger door lock works, good day.
this is a problem that can appear after your car battery died, cause the car didn't reset propely, so taking the battery out and putting it back in or letting your car die again would do the trick. I tried a lot of reprogramming procedured for my remote key, none of them worked, what did the trick though was simply unlocking the doors via the all door unlock button on the passenger side door, so simple.
this is due to a bad switch in the drivers door, when you use the key to unlock the door it should shut down alarm, also the alarm module may be going bad, the alarm is setting itself on, when ever you lock the door the alarm turns on, you will need to replace the switch on the drivers door or unlock the passenger side door that also has a switch that disarms it, the switch is on the lock itself, thats the problem you are having , good day,
The key lock on the driver's side door is mechanically linked to a switch that turns the alarm on and off. You don't need a remote. Locking the door with the key turns the alarm on. Unlocking turns it off. I think the remote actually works through the same switch by mechanically locking or unlocking the door.
I've had a problem with mine intermittently setting off a false alarm as soon as the alarm is armed, which is about a minute after locking the door. It seems to be a problem with a switch in the trunk lid, because opening and closing the trunk is the only thing which relates to the problem appearing or not.
So my workaround, if the alarm is screwing up and I'm in a hurry, is to get out and walk around to the passenger side, open the door, press the dashboard door lock control to lock the doors, then close the door. That locks the doors without turning on the alarm system. To get back in I just use the remote or the door key.
you need to disarm the alarm. unplugging batt. or dead battery being jumped sets of the alarm not all alarms make noise
use remote to lockand then unlock doors need to be closed
or lock then unlock door with key if it dont reset then try passenger door
lock with key,electric door lock button,or remote and alarm will set. to disarm you have to use the key or remote to open it.the reason it woulnt disarm from drivers door is either the door lock cylinder switch is broken or the wire to it in the rubber boot that connects the door and the body is broken.
the remotes are cheap and programing is easy,procedure in owners manuel something like lock drive door with elkect. lock switch with door open then push and hold unlock untill doors unlock then turn key off.you may have to fix that drive door lock cyl.switch first though mabee not dont know for sure