Question about 2000 Dodge Intrepid

1 Answer

Trying to replce dash lights on speedomoter on a

Trying to replce dash lights on speedometer on a 2000 doge intrepid,how do i get to them?

Posted by Anonymous on

  • martinez2566
    martinez2566 Aug 04, 2012




1 Answer

Mukesh Kumar

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 3,230 Answers

Hi there,

Well you can please follow the below steps -
1. Remove the two screws on the underside of the dash cowl.
2. Pull off the trim bezel that surrounds the gauge cluster and dash assembly by pulling it forward with your hands.
3. Remove the four screws that hold the gauge cluster in place.
4. Slide the gauge cluster forward, and remove the electrical plugs from the back of the cluster.
5. Replace the bulbs that are blown. Turn each bulb counterclockwise to unlock it from the dash cluster assembly, then pull the bulb straight out of the housing. Insert the new bulb, align the tabs on the bulb with the notches in the back of the cluster and turn it clockwise to lock it into the housing.
6. Reassemble the dash. Assembly is the reverse of disassembly. Post comments for more help or information........

Good Luck!!

Posted on Mar 27, 2010

Testimonial: "Thanks that was quick I will try it in the morning."


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

2001 dodge intrepid High beam lights wont stay on unless you hold the handle

HEloo ,
It indicates problem with handle, replce the combinationin switch (Headlight handle) it will solve your problem.

Oct 10, 2014 | 2001 Dodge Intrepid

1 Answer

What does it mean when the speedometer goes out?

For speedometer related issues, the help links are provided below. Click the link below to go through its details: ----

How to trouble shoot speedometer?

why speedometer not working?

Speedometer works but odometer not working? ----------- Speedometer runs backward?

Warning lights on and speedometer died?


ABS & Brake lights warning indicator steady on dash and speedometer not working?

Vehicles Cluster panel Not reading Miles?

Odometer works properly but speedometer works intermittently?

How odometer works in cars?

Speedometer not working on Ford?


This will help.


Feb 02, 2012 | 2000 Dodge Intrepid

1 Answer

Transmisson not working right, check engine light stays on, odometer stop working and speedometer all at same time.

Get it scanned, will tell you a lot. Willing to bet its a speed sensor of some sort which would explain the speedomoter not working. You can get the car scanned at autozone if money is an issue, dont drive too long with the problem so you dont ruin the transmission.

Aug 19, 2010 | 2000 Chrysler Cirrus

1 Answer

Intrepid Does not Shift & Speedometer Inoperative

Check the output sensor on the transmission,
With out a speedometer the transmission does not know how fast you are going or when it should shift

Dec 01, 2009 | 2000 Dodge Intrepid

1 Answer

Burned out gauge lights in dash,2000 Doge Intrepid

From one female to another...taking the dash off is a big job. you have to pry off the entire frame first to get to where you want to go. Once you have everything off, the lights are easy. Just remember to place everything in order as you took it off, makes things easier to put back together.

Jun 01, 2009 | 2000 Dodge Intrepid

1 Answer

Burned out gauge lights in dash,2000 Doge Intrepid

Actually it is pretty easy. Take the plastic off from around the base of the steering column...couple of screws. Take the plastic trim off from around the radio. Pop one edge off and then the rest you work pops back in place. Next, tilt your steering wheel as far down as possible.

Remove the plastic around the the whole area in front of the really isn't much, just sounds like it. To do so, remove the fuse panel on the driver's side of the dash. Remove that screw there. That plastic "hood" that covers the gauges, trim piece, it pops right out also. Once that is removed, unscrew the instrument cluster....the screws on the WHITE tabs.

Carefully remove the instrument cluster and unplug the harness in the back....

Pretty much it!

You will laugh when you see how easy it really is once you start to put it back in. Very simple. If you have to do it again, you should be able to do it in like 10 minutes or less......and think of what the dealership would have charged you!!!!!!

Mar 15, 2009 | 2000 Dodge Intrepid

2 Answers

My Dash Quit Working Gauages Lights and all

have you tryed disconect the battery for 30 sec then reconeck,I had same problem on my 2000 doge caravan and that fix it for me....hope it works for you

Jan 31, 2009 | 1999 Dodge Intrepid

1 Answer

None of the instruments in the cluster work (Gas gauge, speedomot

It is possible that the connector came off the back of the circuit board behind the speedometer. Do the lights work IN the speedometer and gauges? Could also be that the ground wire loosened up under the dash, usually on the drivers side. Just some suggestions that I thought might help. Best wishes to you.

Jan 19, 2009 | 2000 Buick Century

Not finding what you are looking for?
2000 Dodge Intrepid Logo

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides