At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I changed the manufactures stereo out of my 1999 ford escort wagon and replaced it with another and faceplate now i cant get the temperature control switch hooked back up how do i do that?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
on the bottom left driver side unplug the black circular module that controls the temperature disable your stereo to hook back up to the teeth on the knob then feed the wire through back to where the module plugs in then put the stereo in the go under your steering wheel to the black module and plug it in now you have temperature back.
SECTION 412-04: Control Components
2000 Escort Workshop Manual
REMOVAL AND INSTALLATION
Procedure revision date: 08/04/1999
Control Assembly
Special Tool(s)
Remover, Audio Unit 415-001 (T87P-19061-A) Removal
Disconnect the battery ground cable (14301).
Rotate the temperature control switch to the COOL position.
Disconnect the A/C temperature cable (19988) from the heater core housing.
Unlock the heater temperature cable by pulling down the tab.
Disconnect the heater temperature cable while holding the tab down.
Use the Radio Removing Tool to pull the integrated control panel out of the instrument panel (04320).
Disconnect the vacuum harness from the function selector switch.
Disconnect the radio antenna lead in cable (18812) and the electrical connectors and remove the control assembly.
Open your trunk or hatch,you may have to pull back the carpet that will cover the tailight lens mounts on the inside.There are 3-or 4 plastic wing nut style nuts behind the light in the trunk. remove these,and pull the lens out from the outside. the lighs will turn usually counter clockwise. replace burnt bulbs. replace the lens,and refasten the nuts carefully.
Remover, Audio Unit
×