- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Make sure you replace it after removal. It is part of the safety system and prevents you getting a broken neck in a crash.
Depress the large button on the head restraint guide and raise the head restraint to the full up position. Depress the smaller button on the opposite head restraint guide and pull upward to remove from the seat.Jan 16, 2022
A common release setup on most cars is a spring latch on the mounting holes on the seat back. Take a close look at the plastic mounts on the top of the actual seat back that the two headrest poles slot into. There should be a sliding button on the side of one of them. Push this button sideways as you pull the headrest up and out of the seat.
If one of the mounts for the headrest has a push button you push to adjust it up or down, then the other mount will have a pinhole on the inner side. It is big enough to insert a small Allen wrench. Push it inwards to release that latch and work the headrest upwards, pressing both latches as you go.
Tracy, Some just pull straight up and out, there may be a pin hole, lever or button just under head rest which will release and allow head rest to be pulled up or pushed down, it does take some force as they do like to get stuck.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Some vehicles have a tiny push button or lever under the headrest where you can hardly see it (for release of the headrest.) If you look top and bottom all over the headrest you may find the release somewhere on yours.
God bless your efforts.
Remove headrest, there is a small button on the base of the headrest mount you need to push in. Next pull up the strap at the front of the seat cushion bottom, then flip forward. Press in the flipper on the top of the seat back and pull forward.
Hi Kathryn, I'm glad to help! CAUTION: If you have "ACTIVE HEADREST" you will want to unhook the negative battery cable. NOTE: You'll also need to take the back of the seat cover off and unplug the connector going to the active headrest. Then simply push the release button on the side of the headrest and pull it upward and out of the seat. "HOWEVER" If you do not have the active headrest, then simply push the release and pull upward out of the seat. Hope this helps and have an awesome day Kathryn.
If the head rest is'nt all the way down you sometimes can work a stift prob like a medal finger nail file next to thepost and release the catch once released and pushing the button and pulling up on the headrest you might be able to unstick it as this proceture may take alot of force.
These can come out two ways. First when you pull it up, look at the plastic seat they go in to. there will be a button To push in to release the headrest. One on each rod that goes in the seat. The other way is that they just pop out, held in by a small ball bearing. Get it to the last notch and pull hard and fast they will pop out.
×