Question about BMW 525

1 Answer

Blinkers don't work: When I use my blinkers to

Blinkers don't work: When I use my blinkers to make a right turn, the light in my dash comes on but don't blink. When I try to make a left turn I don't get anything on the dash and the blinker doesn't work. Either making a right or left turn, my blinkers don't work (91 525i BMW). I've replace the Flash Relay and it didn't correct the problem.

Posted by bmwsaabblack on

Ad

1 Answer

Anonymous

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 73 Answers

The right blinker issue sounds like you have one bulb out either front or rear check them both. The left blinker issue sounds like either bulbs(both out) or fuse, or worst case blinker switch has gone bad on left turn only so not picking up the signal.

Posted on Mar 18, 2010

  • Carnutt67 Jan 05, 2012

    All my blinker lights are working?. I changed the flasher with no fix? I turn on either blinker and the light does not blink! Could this be a bad ground? Or is my switch bad?

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 95 camaro the blinkers just quit working. The hazard lights work, but the blinkers don't work even if the blinker switch is turned on no lights blikeor come on


There is more than one flasher. One is for hazards and the other flasher is for directional signals. They are located under dash just left and right of the steering column. Don't go tearing up the steering column, then you are asking for trouble. Try the least expensive and labor intensive fix first.

Sep 25, 2017 | 1995 Chevrolet Camaro

1 Answer

1996 chevy 1500 truck when i turn left turn signal on back up lights come on and when i turn the right turn signal on the emergency blinkers come on. The front blinkers work correct.


Hmmmmm.....anybody messed with the wiring in the rear to do some trailer towing? Apparently current is getting into the back-up light wiring.You have a burned,melted or bare wire back there maybe. don-ohio

Nov 09, 2011 | Chevrolet 1500 Cars & Trucks

4 Answers

My blinkers don't work on my car at all and my fuse is fine.


There are several things that can cause your blinkers to not function properly. This could be caused by a defective flasher unit, a malfunctioning turn signal switch, or a broken wire, just to name a few. Electrical system diagnostics must be performed to pinpoint the cause of the problem.

Please also review these articles:

Where's The Fuse?

What Else Could Be Wrong?

If you have read the articles and you still want to try to fix your own turn signals, post a comment here to let me know and I can walk you through diagnosing your turn signal circuits.

May 20, 2011 | 2000 Volkswagen Jetta TDI

1 Answer

Today i woke up and my blinkers stopped working, i thought maybe the fuse was out, no fuse is shorted, but the problem is my 2006 model, I can't find the fuse for the blinkers?? is it under the dash or...


First I would like you to read this article:

Where's The Fuse?

Then, in order to find out what is actually wrong, we would have to know more information.

Are the lights coming on and just not flashing?

Are the lights not coming on at all?

Is the problem affecting both the front and the rear?

Is the problem affecting both the Left and the Right side?

Feb 20, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

Blinkers not working on 97 jimmy


located uner dash near centre must pull down all plastic inder dash there should be more then one flasher module there should be right in front of centre concole.

Jan 02, 2009 | 1997 GMC Jimmy

1 Answer

Blinkers


If you can turn the blinker on left or right and the light comes on but doesn't blink......Open the drivers door, there is a fuse box, On the side of the dash.. The relay willl be a small silver canister looking relay in with the fuses.. put your finger on it and turn the blinker on.. you should feel and hear a click...( With the key in the on position ).. That is what needed replaced if it doesn't keep clicking...Thats the turn signal relay... What makes it blink.......Hope this helps..
Please rate this solution if it helps... Thank You.....

Nov 04, 2008 | 1996 Pontiac Grand Am

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

517 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

gbob59

Level 3 Expert

3063 Answers

old marine
old marine

Level 3 Expert

2312 Answers

randymanfive

Level 3 Expert

501 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...