Question about 1992 Ford Ranger

1 Answer

1992 ford ranger =no tail lights,,,,brake and turn signals work

No tail lights,,,,brake and turn signals work,,,,new bulbs didn't fix it

Posted by rlyk on


1 Answer


  • Level 1:

    An expert who has achieved level 1.


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Contributor
  • 27 Answers

Try turning your lights on.....

Posted on Mar 18, 2010


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 1992 ford ranger driver side tail light wont work but the reverse light does the bulb is good done checked that any suggestions

They are separate bulbs.
are you saying you check both of those bulbs?
if you did, and the taillight/marker light is a good bulb, then it's either the bulb receptacle, or the wiring going to it.

Apr 01, 2015 | 1992 Ford Ranger

1 Answer

What would i do if my 1992 ford ranger 2.3l only has one rear brake light not working?

Your bulb is bad,remove and take to Autozone,it's cheap in price,they may help you replace for free.Here's a link to the bulb,Walmart has them cheaper. Brake Light Mini Bulb 1992 Ford Ranger 2WD 4 Cylinders 2 3L FI AutoZone...

Sep 02, 2014 | 1992 Ford Ranger

1 Answer

Bulbs are good fuses are good brake switch is good Turn signals and tail lights work but brake lights dont

Well, you didn't mention what kind of vehicle you have so I can't tell you anything any more specific than what you told me. However, if your brake lights are the type that work on the same bulb as your turn signal, you could have a bad multifunction (turn signal) switch.

Sorry, I can't tell you much more than that with the information I have. YEAR, MAKE, MODEL, ENGINE SIZE would be very helpful if you would like a better answer.

Aug 09, 2011 | Ford F-250 Cars & Trucks

1 Answer

I installed a flatbed on my 94 ranger. I installed new tailingts on unit with 3 wires on lights. How do I wire (1) left signal (1) light (1) brake light (1) backup light to 3 wires on tail light. Of...

I belive the signals and brake light are the same hook up, think about it, when the signals are flashing it is the same filiment in the bulb that works them,

Apr 05, 2011 | Ford Ranger Cars & Trucks

1 Answer

92 Ford Ranger, the tail lights will not come on, the brake and turn signals work. All fuses appear to be ok, I replaced the connectors and bulbs. what would be my next step

You will need to scan the wires. Check closely around the bulb sockets. You might be able to see the damage visually, a burnt wire or a melted wire. You will need to test the wires with a volt reader. If it is not in that area, just start checking the wires of the harness. Also, make sure to look around the fuse housing also. Around the bulb sockets and fuse housing, check them first. If you have a question Marshall, just let me know. I will help you as much as I can. Thanks for choosing Fixya.

Mar 03, 2011 | 1992 Ford Ranger

1 Answer

1992 Ford Ranger Turn signal/Hazard light issue

Can you just check to make sure the ignition key switch is not staying over to far and not backing off when you try to start it. I had a truck that did that and it messed up my turn signals until I brought the key switch back a little after starting it. Just a simple idea. Be kind with your rating for me. Raz

Apr 19, 2010 | 1992 Ford Ranger

3 Answers

Looking for a fuse diagram for a 1992 ford ranger.

tail lights wont come on my 1992 ford ranger xlt but brake lights and back up lights work also instrument panel lights wont come on

Jan 15, 2010 | 1992 Ford Ranger

1 Answer

2006 Ford Ranger. Rear passenger side tail light

Bad earth connection.Clean or replce wire.

Jun 18, 2009 | 2004 Ford Ranger

2 Answers

2003 ford ranger 7 pin wiring for a trailer all I need is what the colors on the wiring are blue/yellow/green/black/brown/white

White is ground, black is power to trailer battery trickle charge, blue is brakes, green is tail/running lights, red is left turn signal and left brake light, brown is right turn signal and right brake light, yellow is aux power/back up lights. This is the general color coding, there are exceptions, white, black, and blue are pretty much always as listed above, sometimes the others vary. If you find you are having trouble, post any further questions here, I'll be glad to help out. Curt

Apr 24, 2009 | 2003 Ford Ranger Regular Cab

Not finding what you are looking for?
1992 Ford Ranger Logo

Related Topics:

628 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts


Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides