Question about 1996 Jeep Grand Cherokee
HAVE YOU CHANGED ALL DOOR JAMB SWITCHES IT SOUNDS LIKE YOU HAVE BAD ONE THINKING DOOR IS AJAR WHEN ITS CLOSED
Posted on Mar 17, 2010
Tips for a great answer:
Unlock all of the Jeep Grand Cherokee's doors and open the driver's side door. Keeping the door open, lock it using the manual lock on the door itself.
Put the manual key into the ignition and switch it to the "On" or "Run" position, whichever applicable, without starting the engine.
Point the remote at the receiver (located by the little bulb on the car ceiling) and hold down the "Lock" button for up to 5 seconds.
When the driver's side door unlocks, you know the remote has been programmed correctly. If you are only programming one remote, jump to the next step. If not, manually re-lock the driver's side door and repeat steps 5 and 6 using each remote you would like to program and then continue.
Turn the key to the "Off" position and turn the ignition on immediately. This must be done within 20 seconds of programming the last remote. You're finished!
Feb 11, 2013 | 1996 Jeep Grand Cherokee
Dec 25, 2012 | 1996 Jeep Grand Cherokee
Jan 28, 2010 | 1996 Jeep Grand Cherokee
Aug 01, 2009 | 1996 Jeep Grand Cherokee
Apr 27, 2009 | 1996 Jeep Cherokee
Oct 23, 2008 | 1996 Jeep Grand Cherokee
220 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: