1998 Ford Explorer Logo
Anonymous
Anonymous Posted on Mar 13, 2010
Answered

Ford explorer 98 will not start it has a V6 4.0 soch motor was running lean left bank that was fixed it throws no computer codes fuel pressure and engine compression all check out fine readings are 30 for fuel pressure and 120 engine compression battery is good and has charge spark plugs have been changed she tries to turn but wont no vacuum leaks everything says my truck should be running but she isn't help I took my daughter to the buss stop turned off the truck to wait and now she won't turn over she has crank but no catch :(

  • Anonymous Mar 13, 2010

    all of that has been checked did I mention she has been hooked up to the computer 2x and it says all systems sensors so on and so forth are fine and we did a comprehensive diagnostic with the new peguses from maco that hind says she is fine loose oxidized battery terminals??? anyways we are working on her as we speak so if my husband fixes it I will let you know thanks

  • Anonymous Mar 13, 2010

    all of that has been checked did I mention she has been hooked up to the computer 2x and it says all systems sensors so on and so forth are fine and we did a comprehensive diagnostic with the new peguses from maco that hind says she is fine loose oxidized battery terminals??? anyways we are working on her as we speak so if my husband fixes it I will let you know thanks

×

1 Answer

Anonymous

Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Brigadier General:

An expert that has over 10,000 points.

  • Master 3,533 Answers
  • Posted on Mar 13, 2010
Anonymous
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.
Brigadier General:

An expert that has over 10,000 points.

Joined: Dec 31, 2008
Answers
3533
Questions
1
Helped
1420892
Points
10516

You may have a bad crank sensor or the timing or timing belt give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your Baby SUV wish you the best of luck Michigan Man.

  • Anonymous Mar 13, 2010

    wish you the best of luck Michigan Man and let me know

×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

What is the fuel pressure specs on a Chevy cobalt 2.2 ecotec 2009
I don't know the exact pressure but 55 psi sounds good to me. Most ordinary passenger cars run at about 2 bar with something like a 5 psi increase for acceleration.
A pressure test isn't a lot of use on its own as it is possible it can provide the pressure when no demands are placed on the engine but not deliver the volume of fuel needed when demands are made. A peak pressure test and a flow test would ensure the fuel system is good.

I am wondering if the egr valve is on the same side as the lean bank? Dodgy egr valves are a big cause of bad running.
Read full answer
Feb 04, 2015 • 2009 Chevrolet Cobalt
0helpful
2answers

What causes code P0133 bank 1, sensor 1 slow response, 03 ford explorer and how do I fix it?
could still be a vacuum leak.

I’m happy to assist further over the phone at https://www.6ya.com/expert/josh_8f8ad0a8f7e0e6d3

Read full answer
Jul 26, 2014 • 2003 Ford Explorer
0helpful
1answer

1999 ford explorer 4 liter code says both banks are lean do all 4 sensors have to be replaced?
You almost never replace all four sensors.
Usually if all 4 sensors are reading lean, the injectors are running lean or there is a massive air leak somewhere.
Have you checked the fuel pressure ?
Read full answer
Jul 20, 2012 • Cars & Trucks
0helpful
2answers

I have a 98 expedition 5.4 l . after warm up runs ruff at idle. codes p0171,p0174.
P0171 - Fuel system lean bank 1
P0172- Fuel System lean bank 2

First steps- search for a vacuum leak and verify proper fuel pressure.
Read full answer
Mar 16, 2012 • 1998 Ford Expedition
0helpful
2answers

Codes 177 and 188 appear what should I do to fix this?
CODE PO177 O2 SENSOR RICH BANK 2. CODE PO188 FUEL SYSTEM LEAN LIMIT PART THROTTLE BANK 2. CHECK FUEL PRESSURE YOU HAVE LEAN FUEL SYTEM CAUSED BY A STOP UP FUEL FILTER OR WEAK FUEL PUMP. AND REPLACE O2 SENSOR.
Read full answer
Feb 23, 2011 • Mercury Sable Cars & Trucks
0helpful
1answer

98 ford explorer running to lean, replaced fuel pump, mass air flow sensor and checked for vaccuum leaks. Any suggestions? we are at a complete loss at this point. Please help
spray carb/choke cleaner under intake on mating surface to lower intake. go around the whole intake, dont be shy but spray it.(motor running) does rpm change? if bad seal Usually rpm raises. if so replace intake gaskets, $22.00 parts. Is check eng light on? if yes code check it.although it will only read lean as it cannot detect air leaks. if no code or light carb cleaner is the way to check for air leaks. NOT STARTING FLUID!! I just finished this repair on my 98 tonight, 1-6-11 it runs great, idles also.
Read full answer
Dec 31, 2010 • 1998 Ford Explorer
4helpful
1answer

Have a 2007 ford 500 wont start shows codes po191 p2196 p2198
P0191 is Fuel Rail Pressure Sensor "A" Circuit Range/Performance
P2196 and P2198 are lean bank 1 and lean bank 2. You normally show lean bank codes if the air-fuel ratio is not correct. The most common cause is a hole in the hoses between the PCV valve and the intake on the motor (back of the motor generally). The fuel rail pressure sensor code could either be caused by the vacuum leak or by a failing fuel regulator. I would first check for holes in the rubber hoses especially where there are right angle rubber hose connectors. Look for soft squishy or oily spots on the hoses.
Read full answer
Aug 14, 2010 • 2006 Ford Five Hundred
1helpful
1answer

I have two code PO0171 and PO0174 it says my bank 1 and bank 2 are lean is this a problem with my fuel flex?
I have the same codes on my 2003 Explorer 4.0 Liter V6. I was told many things from bad fuel pressure to bad computer. One peice of advice was correct. Bad air fuel mixture caused by a vacuum leak. The leak could be from a bad vacuum hose or the intake gasket. Mine turned out to be a hole in an elbow vacuum hose on the top of the engine, passanger side, near the intake. Fixed and runs great with no more check engine light.
Read full answer
Jan 04, 2010 • 2000 Ford Taurus
0helpful
2answers

I have a bank 1 too lean code on 1996 8 cylinder explorer how do i start
I would start with the O2 sensor on that side of engine.
Read full answer
Oct 16, 2009 • 1996 Ford Explorer
0helpful
1answer

2000 Ford explore XLT 4.0 soch
P0171 is System adaotive fuel too lean ( bank 1 )
174 is Heated oxygen sensor switching slow, right side

i do not know what to tell you for the p0171 but the 174's answer is a new oxygen sensor.
Read full answer
Jul 18, 2008 • 2000 Ford Explorer
Not finding what you are looking for?

View Most Popular

1998 Explorer

  • Cars & Trucks

Related Question

What is the fuel pressure specs on a Chevy cobalt 2.2 ecotec 2009

  • 2009 Chevrolet Cobalt

Related Topics

319 views

Ask a Question

Usually answered in minutes!

Popular Questions

I need a fuse box diagram of a 98 ford explorer.

1998 Ford Explorer

1996 ford explorer diagram of the fuse box

1996 Ford Explorer

Need to see fuse box diagram for a 2004 ford explorer

2004 Ford Explorer

Poner a tiempo cadenas de distribucion ford motor 4.0 mod 2002

2006 Ford Explorer

Wiring diagram 1996 ford explorer premium sound radio f57f-19b165-ag

1996 Ford Explorer

Check Out the Latest Top Trucks Report!
Check Out the Latest Top Trucks Report!

View all Fixya Reports

Top Ford Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...