Question about 1998 Chrysler Sebring
I have a 1998 Chrysler Sebring Coupe Lxi, 2.5 engine have replaced alternator and water pump along with the fuel pump and filter and have drove it for the last 12 years with little or no problem. While driving down the road, my car died. Well, it chugged first and died. I had gas in the tank 3/4th of a tank. Tried to jump it off and it would do nothing. So I replaced the battery and it still wouldn't start. It tries but doesn't connect. I have used 2 different OBD meters and it says on both no communications is ignition on? The ignition was on but no reading of any kind. I don't know if it would be the PCM, senor or relay and even thought of a short in wiring. Can you help???
How do you remove an alternator on a 1998 chrysler sebring lxi?
Posted on Apr 02, 2010
First as a rule of thumb, check your fuses
then check for spark at the spark plugs
then check for fuel at the fuel rail
you should eliminate some of the system at this time
Posted on Mar 08, 2010
Tips for a great answer:
Jan 01, 2016 | 2002 Chrysler Sebring
Mar 27, 2014 | 2002 Chrysler Sebring
May 21, 2011 | Chrysler Sebring Cars & Trucks
May 12, 2011 | Chrysler Sebring Cars & Trucks
Mar 21, 2011 | 1998 Chrysler Sebring
Jul 06, 2010 | 2001 Chrysler Sebring
Aug 23, 2009 | 2001 Chrysler Sebring
Mar 14, 2009 | 2001 Chrysler Sebring
Dec 17, 2008 | 1998 Chrysler Sebring
1,027 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: