2001 Pontiac Grand Prix Logo
Posted on Mar 03, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

2001 grand prix..fuel door hinge is broken.how do you get at the hinge on the fuel door.?

2 Answers

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on Mar 10, 2010
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Mar 10, 2010
Answers
1
Questions
0
Helped
3275
Points
8

I just fixed mine the other day. Take off all the screws you see inside the fuel door (You will need a #15 torx screwdriver and a small socket set). Then you have to drill out the 2 rivets (one on top, and one below the hinge.

You should be able to remove the door and hinge assembly now.

I think you will find that the hinge pins have rusted out. I replace mine with the shafts of drill bits. You will not be able to cut the drill bits, but if you put them in a vice you can break them off at the appropriate length with a hammer, just watch your eyes :-)

Then re-install, and re-rivet.

If you have any questions e-mail me rstbc at hotmail.

Cheers

scrap_it

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

  • Expert 87 Answers
  • Posted on Mar 06, 2010
scrap_it
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

New Friend:

An expert that has 1 follower.

Joined: Mar 06, 2010
Answers
87
Questions
0
Helped
30371
Points
146

There is aplastic ring in there try taking it out if not then go under car to do it

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Fuel dool falling off on a gran prix

that seems to be the going trend with alot of Grand Prix"s - its the hinge inside the fuel door that has rotted off
1helpful
1answer

My2000 grand prix gt driver door will not latch close. How do i fix this

The driver door hinges may be loose and need to be adjusted.The latch itself could be bent or damaged as well.
0helpful
1answer

I have a 2002 grand prix gr 4 door and the front driver side window won't roll up. I'm trying to use a jumper wire but do not know which one is the power wire and don't have access to a test...

Pink wire is ignition in to switch / module. Check the door hinge area and the rubber boot where all the wiring runs. Most likly a broken wire or two in that flex joint. Not uncommon.
If none of the above works, most likly the switch may be bad.
0helpful
2answers

Why do the doors on a 1996 grand prix sag so bad

COS THEY ARE TOO BLOODY HEAVY...use a lump of 3x3 to lift the rear of the door to "adjust" the door back to its normal level)
5helpful
1answer

Key locked in 2001 pontiac grand prix battery is

lock smith or someone authorized to use a slimjim[can do more damage if dont know how to use ]--or-- key fob wont work if vehicle battery dead if u can reach up under car at front and release hood latch then jump battery and then use key fob to unlock door
6helpful
2answers

2001 pontiac grand prix fuel door is loose and fell off. How do u remove old assembly?

open the fuel door remove screws for filler remover plastic filler you now have access to fuel door & hinge assemble
0helpful
1answer

I need to remove and replace my drivers side door and do not know how to do so.

go look at the passengers side. take note of the door seam and fender seam width. its about the width of a piece of cardboad. additionally look at the door hinges on the passenger side. it may or may not have washer shims. if they do/dont then just match up with passenger side. it takes 2 people to hang the door. screw in door hinges "finger tight" just to take off the weight of someone holding the door. play with the hinges until you can open/close door without binding or crimping fender at the seam. do not over tighten hinge bolts until the door opens/closes unobstructed. bottomline 2 people needed. slow and tedious job. you may have to add or take shims(washers) out for good fit. note that you may have to add shims to the inner door hinges or to the fender hinges where they meet. hope this is clear instructions.
Not finding what you are looking for?

3,285 views

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...