Question about 2000 Mitsubishi Eclipse

1 Answer

I have a 2000 Mitsubishi Eclipse, while installing a new stereo, the stereo just shut off, I hooked the original stereo back up and that didn't work either. I checked the fuse located on the driver side, and it was fine? please help!! The car is a GT so it has the infinity sound too.

Posted by Anonymous on

Ad

1 Answer

richochet

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Mitsubishi Master
  • 1,026 Answers

Radio needs coding maybe

Posted on Mar 03, 2010

  • Brittanys5Ss May 08, 2011

    If you put the code in and it still doesnt have sound, but the display is working, more than likely the AMP is not plugged in right. Its the cord that goes in the back of the player that has all those little pins that have to be EXACTLY right in the holes or the amp will not work and you will not have any sound. After taking it to Mitsubishi who wanted to charge me for 2 hours of diagnostics, I decided to stop by an aftermarket stereo center and the tech there told me that was more than likely the problem because its very rare for a factory amp to go bad. Sure enough, that fixed the problem!

  • richochet May 12, 2011

    delighted you got it sorted richochet

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the firing order for the 2000 mitsubishi eclipse gt on the distributor cap?


This process did not work for me on mine. I have a 2000 eclipse gt and I done it exactly how you say above and it wasn't right. Still dont know what it is. Ive been told that the #1 cylinder is in the front left looking from the front of the car. 135 front 246 back. And #1 on cap is at the top in back. Havent tried it yet to see if it works but that's what i was told

Oct 13, 2012 | 2000 Mitsubishi Eclipse

1 Answer

Need code for 2000 mitsubishi eclipse radio


Mitsubishi codes are only available from the Main Dealer or a Radio Decoding Service.

They are not available for free as access is required to the original factory database ...which is not commercially available....Sorry

Apr 17, 2010 | 2000 Mitsubishi Eclipse

1 Answer

Mitsubishi Eclipse stock stereo states code needed


There should be a code inside of the instruction manual that contains the code. Enter this code on your stereo. If you can not find the code, your local mitsubishi dealer can look it up based on the radio's serial number.

Mar 12, 2010 | 2000 Mitsubishi Eclipse

1 Answer

I HAVE A 97 ECLIPSE GST. I HAD TO GET A NEW O2 SENSOR AND WHEN I WAS HOOKING IT UP A WIRE SPARKED AND NOW MY CAR WILL RUN BUT IT SEEMS LIKE IT ISN'T GET ENOUGHT AIR. I GOT A NEW MASS AIR METER BUT IT...


you must of used a universal sensor,pull that off and buy a complete sensor with plug, you shouldnt use those they are junk,all you do is connect the connector, try that,

Mar 09, 2010 | 1997 Mitsubishi Eclipse

1 Answer

2000 Mitsubishi Eclipse body work


By a Haynes or Chilton's manual. It will show all the steps. Take pictures as you go in case a step is missing so you can refer to the pictures for guidance.

Jul 17, 2009 | 2000 Mitsubishi Eclipse

2 Answers

Wont get any sound from speakers


You don't have a ground hooked up somewhere on the stereo, or you have your wiring incorrect.

May 30, 2009 | 2000 Mitsubishi Eclipse

1 Answer

2003 mitsubishi eclipse


They change the radio stations and tracks on the CD, and volume. If you don't have the default stereo installed, then the wires probably aren't hooked up properly to the new radio, and the buttons probably don't work.

Apr 05, 2009 | 2003 Mitsubishi Eclipse Coupe

1 Answer

I am trying to install new stereo in 2003 spyder eclipse


IF YOU GO TO WALMART AND BUY THE WIRING HOOK UP KIT THATS MADE JUST FOR YOUR TYPE OF CAR U SHOULD NOT HAVE ANY PROBLEMS.. YOU CAN DO THE AMP BYPASS, OR YOU CAN INSTALL YOU NEW DECK AND REWIRE THE SPEAKERS DIRECTLY TO THE NEW DECK.. HOPE I WAS A HELP GOOD LUCK KEITH..

Mar 11, 2009 | 2003 Mitsubishi Eclipse Spyder

Not finding what you are looking for?
2000 Mitsubishi Eclipse Logo

335 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14866 Answers

Vincent G
Vincent G

Level 3 Expert

2363 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...