Question about 2005 Peugeot 405

2 Answers

Windscreen wiper snapped-Peugeot 206 Verve 52 plate

The driver side windscreen wiper got caught up with the passenger side one.The motor and the passenger side wiper is still working.

We have had a look at it and the part of the mechanism that moves the blades 2 and fro has snapped. Can you buy the mechanism on it's own or do I need to get a whole new set of windscreen wipers. Anyone know how much that will be?

Posted by luci_newman on

  • jyldarlow
    jyldarlow Jan 05, 2012

    Hi, this exact thing happened to me tonight, (right in the middle of rainy season!) How did you solve the problem? and did it cost a lot? Thanks, Jyl

×

Ad

2 Answers

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 3 Answers

This just happened to us, the drivers side stopped working after getting tangled up with the passenger side...it was just a case of tightening up the 13mm nuts on the wiper arm.

Posted on Apr 05, 2010

  • David296h Feb 09, 2011

    Brilliant Thank you. Saved me a lot of heartache. Took a 13 mm ring spanner to the two nuts, did a little tweaking and it seems to be sorted. The nut closest to the passenger side was loose even though it was the driver side wiper that had failed. I tightened it and the driver side arm moved again but the sync was poor and they tangled again after a few sweeps. I did a bit of loosening and re-tightening of both the nuts and the problem seems to have righted itself. Thanks again.

×

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

The exact same thing happened with the wipers on my 206, they got intangled and now my driver side arm isn't working. I havent checked yet to see if the mechanism has snapped though and I hope not. Is it possible that the driverside wiper stops repsonding for any other(more minor) fault

Posted on Feb 26, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Peugeot 206 03 plate fuse for windscreen wiper washers


At this website www.reliable-store.com I found all complete guide, much better language, complete detail in
800+ pages, and they also have live assistance feature

Mar 09, 2018 | Peugeot 206 Cars & Trucks

1 Answer

How will I operate so that the wiper at the back will move?


The windscreen wiper stick attached to the steering wheel column has two functions. The up and down movement is to control the operation of the front wipers and a small ring collar that rotates on the wiper stick handle to control the rear wipers.

Hope this helps. You can get a manual from this site and check on page 110 http://www.scribd.com/doc/43174930/peugeot-206-2005-2006-manual

Aug 02, 2014 | Peugeot 206 Cars & Trucks

1 Answer

PEUGEOT 206 VERVE 06 PLATE WIPER SNAGS ON SIDE


remove the wiper arm and reposition it a bit further up on the windscreen. Make sure that the rubber is not much past the blade arm.

Dec 31, 2013 | 2006 Peugeot 206 1.4

1 Answer

Peugot wiper blade sticking


Check that the rubber is inserted properly in the steel backing and the backing is allowed to flex freely to follow the windscreen. Check for correct rubber blade as the wrong ones will cause this problem

Feb 01, 2013 | Peugeot Cars & Trucks

1 Answer

Windscreen wipers not working on peugeot 206hdi 2004 fuses find no power to windscreen motor not sure if its a relay or stalk on column ?


The relay for these should be in the motor assembly itself. If there is no power getting to the motor, replace the switch on the column. This should rectify the issue. I have a manual for a 406 if that may be of some assistamce to you.

Oct 25, 2010 | 2005 Peugeot 405

2 Answers

Why does my Peugeot 206cc windscreen wipers keep going off on their own?


Auto water detection system on the windscreen sets them off

Apr 17, 2010 | 1989 Peugeot 405

1 Answer

Passenger side front windscreen wiper does not move


yes, they have little teeth on them which are probably worn down. have to replace it.

Feb 21, 2010 | 2006 Audi A3

1 Answer

Hi, I have a peugeot 206 2005 diesel and the windscreen washers aren't working. They don't even make a noise so i assume the fuse has blown with the recent cold weather? Does anybody know which fuse it is?...


The fuse box is inside the glove box (on passenger side dash board).
Open the glove box and you'll then see a small box on the side with a Plastic screw on it. Turn the screw to 90° to open the fuse box. Which fuse it could be for washer motor i really don't know as peugeot service manual has not lost any word about fuse plan.

Jan 14, 2010 | 2005 Peugeot 405

2 Answers

Hi my 2000 peugeot 206 windscreen wipers keep coming and going they will make a few full moves then only go a bit and may take up to an hour to go back down and wont work then for ages i tryed changing the...


When you can't find any fault code in ecu log then in my opinion its the wiper motor that has gone. May be motor has a broken pinion which doesn't engage the wiper arms properly and causes the problem. Buy a used wiper motor from ebay and give it a try. I hope that it'll work.

Jan 11, 2010 | 2005 Peugeot 405

1 Answer

Windscreen wipers only working on the nearside of the screen peugeot 206


one of the drive arms has disconnected u need to access under the wiper arms and reconnect if not broken, or replace

Jan 03, 2010 | Peugeot 405 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

944 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

scj103

Level 2 Expert

104 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...