Raise the tilt wheel to the upper position
Remove the lower philips screws securing the upper and lower clamshells on the column.
Release the top and bottom clamshells from one another by pressing together where they meet.
Unplug the electrical connector from the back of the turn signal stalk
Early 2000 eclipses:
Remove two philips screws bolting the signal stalk base to the column
Late 2000 eclipses:
Squeeze the top and bottom release levers to release the signal stalk base from the column
Pull the stalk and base straight outward to remove from the column.
Installation is the reverse.
1,191 views
Usually answered in minutes!
×