Worn out pads or rotor, possible broken abs cable to brake. first check to see if all 4 are connected. all ore on back side of brake dust shield. than check to see if the brakes are worn last is the rotors. also see if there is a recall on the brake and battery re charge system.
Low brake pedal indicates the need to have the rear drum brakes adjusted, if caliper brakes are on back, you need to check other options, abs light on indicates the need to replace the toothed ring, may be broken.
Hello
The
engine and the automatic transmission in this vehicle are computer
controlled and in most cases when a fault occurs a fault code is
stored in the memory of the computer control module. There are
exception to this, such as the Mass Airflow Meter and fuel pressure
problems. What must be done is to have all the basic testing done
such as a scan of the system for fault codes as well as a check with
a live data scanner tool for engine functions that are not within
range of normal, a trained technician is required to know what is
correct and what isn't, then based on careful diagnostics done from
a factory repair manual the correct part is replaced or the wiring
repaired or the computer replaced (known as the PCM), which is very
rarely the problem. Other basic checks must be done as well such as
mechanical problems with the engine as well as engine state of tune
and mileage on the engine. The transmission can have mechanical
issues as well such as no gear engagement at all or a failed pump or
other pressure related problems.
702 views
Usually answered in minutes!
×