Question about 2001 Toyota Corolla

1 Answer

SERPENTINE BELT REPLACEMENT

ADJUSTMENT OF BELT FOR PLACEMENT ON PULLIES

Posted by joyce newman on

Ad

1 Answer

Patrick Rayome

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Toyota Master
  • 1,757 Answers

The Belt Diagram should be on the underside of your hood, however they have a way of disappearing.

If it is not there:

Click on the following free direct Link. It has the correct Serpentine Belt Diagrams for your 2001 Toyota Corolla 1.8L (4-Cylinder) Engine and Engine Options (AC/No AC etc.). Included are Instructional and Directional Diagrams for your use.

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!

http://www.2carpros.com/car_repair_information/year/2001/make/toyota/model/corolla/2001_toyota_corolla_drive_belt_routing_diagram.htm "HOW TO":
Standard Rules to Removal the Serpentine Belt with an Automatic Tensioner:
1. Find the Tensioner(s). (See Diagrams on Link)
2. Using a Serpentine Belt Tensioner Tool, Or Wrench OR Ratchet, Rotate/Move the Tensioner USING THE AVAILABLE NUT (on the Pulley or Arm Base) OR the OPENING (3/8ths or 1/2 inch square opening) rotating the Tensioner Pulley/Arm - moving it away from contact with the belt and towards the area where the belt is not in contact with the Tensioner Pulley. The Tensioner is spring loaded, and is hard to rotate/move.
3. Remove the loosened belt off one of the other more easily accessed Pulleys.
4. DO NOT quickly release the Tensioner, but gently allow the Tensioner to rest in its closed position.

Standard Rules for Installing the Serpentine Belt with an Automatic Tensioner:
a. Pick a Pulley that is most easily accessed. This will usually be on top. This will be the last Pulley that the belt will go on.
b. Using the Diagram: Install the new Serpentine Belt on the remainder of the Pulleys....over, under, left right.
c. Using a Serpentine Belt Tensioner Tool or Wrench or Ratchet Tool: Rotate/Move the Tensioner Pulley/Arm "away" from Belt contact area on the Tensioner. This spring is pretty hard and with a new belt, it will be even harder to install. Rotate/Move this to as-close to the maximum allowed inorder to have enough slack in the belt to get it up and over the last pulley.
d. Using your other hand - Pull the Belt up and over the Last remaining Pulley.
e. Before releasing the pressure on the Tensioner, visually inspect the remainder Pulleys and the Belts' Positioning on them.

Posted on Apr 02, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Replace alternator belt


What kind of vehicle what yr and motor size if you want to know what and how to change usually there is a belt tenstioner and you have to put a bar in the tenstioner to remove the testion and belt comes of pullies whatch the way it comes of cause it will be a nightmare to reinstall the belt there usually is a picture of the front of vehicles with a diagram of nthe pullies and the way belt goes on.

Nov 30, 2014 | Cars & Trucks

1 Answer

94 wrangler 4 cylinder makes a whining noise and wont turn over when you try to start it, the serpentine belt does not move, it cranked over a couple of times but it was making a grinding sound and i...


Sounds like something in the engine "froze" or stuck Unhook the battery and try turning the engine with a wrench/rachet both ways. Check the timing belt, if broken the pistons will come up and hit the valves then stop everything from turning. Is one of the pullies stuck? Take off the serpentine belt and check all pullies to see if they turn.

Jan 14, 2010 | 1994 Jeep Wrangler

2 Answers

Need to make belt tighter is there a tension adjustment and if so where is it located


Serpentine belf is self adjusting the tensioner is spring loaded no adjustment, if weak replace it.If belt was replace make sure you have the right size belt, before replace tensioner.

Jan 06, 2010 | 2004 Ford Taurus

1 Answer

Serpentine belt (2007 escalade ext) replacement


if the old belt is still on, just draw on a peice of paper all the pullies & draw how the belt winds around all the pullies, very easy.

Nov 02, 2009 | 2007 Cadillac Escalade Ext

1 Answer

I dont have a diagram to run serpentine belt to a toyota camry 03


Hi

Replacing Serpentine belt on a Toyota camry 2003—


Step 1--Examine the belt placement of your Toyota Camry fan belt so that you will remember how to put it back once you have removed it. Refer to the vehicle owner's manual for further information. Locate the pivot bolt on the front passenger side of the engine. Loosen the pivot bolt with a socket wrench.


Step 2--Loosen the adjustment locking bolt that is just below the tensioner pulley with a socket wrench, and then loosen the tensioner pulley to allow the belt to move free.


Step 3--Check the belt for any signs of cracking or irregular wear, so you can fix any problems that may exist with the pulleys. Remove the fan belt from the pulleys on the engine and take it out of the engine compartment.


Step 4--Wrap the new fan belt around each of the pulleys the same way it came out. When you have the belt in place, tighten the tensioner pulley with a socket wrench.


Step 5--Tighten the adjustment locking bolt and the pivot bolt with a socket wrench, and then look over the engine to check that everything is back in place.


Step 6--Turn the vehicle engine on and watch it for a few minutes to verify that everything is operating properly, then turn the engine off.


Please refer to these links for serpentine belt diagrams—

Serpentine belt on a Toyota camry Link 1

Serpentine belt on a Toyota camry Link 2

Please do accept the solution and revert for further assistance.

Thanks
Rylee

Jul 13, 2009 | 2003 Toyota Camry

1 Answer

Need diagram to install serpentine belt


Look at the pullies to see if they are smooth or if they have lines on then. The back side of the belt the ( smooth side) goes against the smooth pullies.The side with lines on it goes to the other pullies. Some vehicles have the diagran in the engine compartment. Under the hood or by the top of the radiater.

May 10, 2009 | 2001 Isuzu Rodeo

1 Answer

Replace supercharger serpentine belt 96 riviera


HI,FIRST OFF THIS IS A SIMPLE FIX,IF YA JUST DON'T LET THE THING SCARE YA.THERE IS A DIAGRAM ON THE ENGINGE SIDE OF THE HOOD ALSO TO HELP YA REMEMBER I ALWAYS MAKE MY OWN ,HOPEFULY YOUR NOT AS THICK HEADED AS I AM.HEHEHE!FIND THE BELT TENSIONER IT WILL BE SHINY.WITH THE HAND PUSH ON IT SHOULD MOVE UP AND DOWN JUST A LITTLE.YOU SHOULD SEE A BOLT HEAD IN THE CENTER OF THE WEEL/PULLY .WITH THE CORRECT SIZE WRENCH OR SCOKET PUSH DOWN ON TOOL THE BELT WILL LOOSEN UP ENOUGH TO REMOVE.REINSTALL NEW BELT MAKING SURE THE BELT IS ON ALL PULLIES AND THEN REMOVE PRESSURE FROM WRENCH THE BELT SHOULD BE ON ALL PULLIES AND TIGHT START THE ENGINE AND CHECK THAT THE BELT IS TURNING ALL YOUR PULLIES AND THEN TURN OFF ENGINE CHECK YOUR GREAT WORK YOU SHOULD HAVE ALL PULLIES TOUCHING THE BELT AND THE BELT TENSIONER KEEPS THE BELT TIGHT ,NO ADJUSTMENT NEEDED.I HOPE THIS WORKED FOR YA ,IF NOT REDO THE JOB YA WILL QUICKLY SEE WHAT YA NEED TO DO THE NEXT TIME IT'S JUST THAT EASY .

May 05, 2009 | 1995 Buick Riviera

1 Answer

Serpentine belt placement diagram


There a so many different combinations because of engines and options .. but here they all are

Mar 23, 2009 | 2000 Dodge Dakota Quad Cab

2 Answers

Serpentine belt replacement


What engine do you have? The 3.3 and 3.8 engines have a single serpentine belt, and a belt tensioner, so no adjustment is needed. Did you replace the tensioner, and want to know how much to torque it? countrycurt0

Jul 20, 2008 | 1998 Dodge Grand Caravan

Not finding what you are looking for?
2001 Toyota Corolla Logo

897 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...