1999 Chevrolet Venture Logo
Posted on Feb 11, 2010
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Instructions for replacing sway bar on chevy venture

1 Answer

Joseph Howard

Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Chevrolet Master 753 Answers
  • Posted on Feb 11, 2010
Joseph Howard
Chevrolet Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Aug 08, 2009
Answers
753
Questions
0
Helped
297069
Points
2162

Not that hard using 13mm socket and wrench remove the 2 outer end links at the lower control arms.Then the covers and isolators on the subframe remove front sway bar.Now would be a good time to replace end links because bolts rust and get thin inside metal spacer.

2 Related Answers

jimmy

  • 409 Answers
  • Posted on Mar 12, 2010

SOURCE: 2000 Chevrolet Venture - How hard is it to replace the front hubs

not too bad a job, the hubs are sealed bearing units and replace in one piece. The stabilizer is a cinch just get both front wheels the same height off the ground, so the bar will be unloaded, and un bolt it.

Ad
1ATony

Tony Marchand

  • 159 Answers
  • Posted on Feb 22, 2011

SOURCE: 99 chevy venture front sway bar broke

The sway bar is pretty easy to fix. Here's a video that will show you exactly how to change the one in your Chevy Venture.">

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to change rear sway bar bushing chevy 2005 malibu

The sway bar bushings are easily replaceable ....remove the 2 bolts that hold the mount and remove the old/damaged bushing.....slip the new one over the sway bar and replace the bracket....done.
I would replace both while I was under the car....here is a picture for reference....
25419038-0zrxxgbhqjc0e4fyjnl1mtlv-5-0.jpg
0helpful
1answer

Sway bar rubbing on tie rods

Usually suspension lifts utilize longer sway bar links or relocates the sway bar lower to accommodate the change in distance between lower control arms and the frame.
0helpful
1answer

Replace front strut chevy venture

Its an easy job if you use a replacement strut assembly with the spring installed.These are best as you get a new top strut mount which includes a new top bearing ,a new spring and of coarse the new strut. 3 bolts at the top and a sway bar link to disconnect in the wheel well and 2 bolts at the strut/hub.If you do not buy an assembled strut DO NOT try to remove the spring without a GOOD spring compressor!!!!
0helpful
1answer

I need to know the name of the two short bars on the back side of the axel that keeps the van from swaying back and forth

sway bar links or stabilizer links? One end is attached to the stabilizer bar and the other end is attached to the strut I believe.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

1helpful
1answer

What causes rocking side to side ,or swaying it does this parked or driving no noises just started to sway back and forth.1999 Chevy Venture

It sounds like you may have bad shock absorbers. It could also be the anti-sway bars are worn out, or broken. These are 2 components that could cause the problem you're having. Take it to a repair center, & have it put on a lift to see the full view of the undercarriage. That will let you see all the components at the same time.
0helpful
1answer

2000 Chevrolet Venture - How hard is it to replace the front hubs

not too bad a job, the hubs are sealed bearing units and replace in one piece. The stabilizer is a cinch just get both front wheels the same height off the ground, so the bar will be unloaded, and un bolt it.
8helpful
3answers

99 chevy venture front sway bar broke

The sway bar is pretty easy to fix. Here's a video that will show you exactly how to change the one in your Chevy Venture.">
0helpful
1answer

Front end sounds like snapping rubberbands when turning wheel

sounds like tie rod ends with the shaking.check struts and sway bar links on the snapping. hope this helps you.
Not finding what you are looking for?

594 views

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...