How do i reset Engine Service Soon light

i would assume they did not clear the miles to zero
check on the web how to clear it yourself and do it
just type in service engine soon light 2006 maxima and it will give you the steps to follow

this light may be the check engine light. it's misleading. I've seen two service engine soon lights in cars. one for check engine, one for service. have it checked with a scanner

U can reset the light with a OBD 2 code reader (prefered method) or u can disconnect the battery NEGATIVE cable for 5 minutes, this erases everything including radio stations and time settings, so if u klnow anyone with a OBD 2 code reader do it that way.

You generaly need to use the trouble scanner tool to reset the light, but disconecting the battery for five minutes may also work.

identify thru computer which cylinder is the culprete then check for injector winding problems, bad grounds , have your local tech check for t.s.b. on this problem? also have you replaced the plugs?

sounds like solenoid on starter is worn, replace starter.

catalytic converter is the way to fix your problem because they do an emissions test and the code want go away even if you get the light off before you take it in they will no the computer has just been reset so which means all the sensors want have enough info to give the computer because of being reset sorry to break it to you.

you can get help from the factory service and repair manual from the given link and fix the facing problem http://toolsnyou.com/

I had the same indications on My 2000 Maxima but the engine was also running rough . I replaced the number 3 cylinder ignition module and all of the spark plugs and all of the error lights are back to normal I had to reset the check engine light by disconnecting the battery for about 15 minutes.By the way my car has 253,000 miles on it so if you have a lot of miles on your car you might want to check all of the ignition modules so pull your spark plugs and read them they might tell you where your problem is .