Question about 2000 Honda Civic

1 Answer

What are the cylinder head bolt torque for 2000 dodge caravan 2.4L

Posted by maine305 on

Ad

1 Answer

Ray Keckeisen

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Honda Master
  • 599 Answers

These are done in three stages 1:tighten all bolts to 25ft lbs. 2nd: all bolts to 50 ft lbs 3: retighten all bolts to 50ft lbs. the last stage is to tighten all bolts 1/4 turn more. do not use torque wrench for the last 1/4 turn hope this helps

Posted on Feb 06, 2010

Ad

5 Related Answers

c17hydro

Greg Bernett

  • 2989 Answers

SOURCE: What is the sequence for the bolts on oil pan, for

For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:




40be0ec.gif

30fedd0.gif
For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

Posted on Jul 12, 2009

Ad
outdoorsman5

outdoorsman5

  • 631 Answers

SOURCE: head bolt torque specs for 2000 dodge neon 2.0 SOHC

I have the specs and diagrams. If you want me to send them to you, give me your email address. [email protected]

Posted on Sep 05, 2009

edwardjwoods

Ed Woods

  • 372 Answers

SOURCE: need the torque specs for dodge colt cylinder

51 to 54 foot pounds. There is a sequence for tightning them though.

Posted on Oct 04, 2009

Anonymous

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

Frank Ferree

  • 335 Answers

SOURCE: cylinder head bolt torque chevrolet 3.4

here is the troque spec for the cylinder heads.

Cylinder Head Bolt

  • First Pass
60 N·m
44 lb ft
  • Final Pass
95 degrees
Cylinder Head Bolt
  • First Pass
60 N·m
44 lb ft
  • Final Pass
95 degrees


Cylinder Head Bolt
  • First Pass
60 N·m
44 lb ft
  • Final Pass
95 degrees
first pass 44 ftlbs
second pass 95 degrees

Posted on Jun 19, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the torque in ft lbs for the cylinder head bolts on a 2006 3.3L caravan


This is for 201 cubic inch--3.3L engine--engine code R.
1st step 45 ft lbs
2nd step 65 ft lbs
3rd step 65 ft lbs
4th step do not use torque wrench but turn 90 degrees
Bolt torque after 90 degree turn should be over 90 ft lbs, if not replace bolt.

Jan 18, 2018 | Dodge Caravan Cars & Trucks

1 Answer

CYLINDER HEAD BOLT


torque sequence on heads is middle first then stagger to next front then next rear and so on . 50 % of recommended torque on all then final torque all.

Mar 20, 2014 | 2001 Dodge Grand Caravan

1 Answer

2000 dodge caravan had blown headgaskit mechanic sent both heads to machine shop reinstalled had bad miss took back said found bad push rod fixed still has bad miss took back he could n ot find prob...


Make sure the mechanic replaced your head bolts. Do not re use old head bolts. Then verify your compression at each cylinder, then you can move on to other possibilities. If you have good pressure and the torque sequence was followed, then check the basics; spark plugs, wires, and your coil pack. (I think you have a coil pack, not a cap) My money is on your coil pack. There is many things it could be, but this gives you a starting point.

Jan 26, 2014 | 2000 Dodge Caravan

1 Answer

Cylinder head torque specs on a 2000 volvo s70 2.4 Liter


you have torque cylinder head bolts in 3 steps first torque bolts 14 ft lbs then second torque all bolts to 43 ft lbs step three torque all cylinder bolts to plus 90 degrees.

Nov 15, 2012 | 2000 Volvo S40

1 Answer

Lookin for head torque specs and sequence


Torque sequence ----------- ' 9 7 3 1 5 ' ' 8 4 2 6 ' ----------- Step 1: torque in sequence to 45 Ft/Lbs Step 2: torque in sequence to 65 Ft/Lbs Step 3: torque in sequence to 65 Ft/Lbs again plus 1/4 turn Step 4: Torque small bolt in rear of head to 25 Ft/Lb Recheck final torque in sequence *** CAUTION ***engine uses Torque To Yield head bolts (TTY) thatpermanently stretch during the initial installation.New head bolts must be used when cylinder head isreplaced or re-installed to obtain proper torque.
3.3L

Feb 07, 2011 | 1996 Dodge Grand Caravan

1 Answer

I need the 1993 dodge caravan 3.0 v6 sylinder head bolt torque speks


The correct torque for the head bolts on a 3.0 v6 caravan motor is 70 Ft-lbs. (as stated in my Haynes Service manual)

Dec 19, 2010 | 1993 Dodge Caravan

1 Answer

Torque sequence and settings for head bolts on 3.3 dodge caravan motor?


torque and sequence spec on 2005 caravan 3.3l cylinder head bolts

Jan 17, 2010 | 1998 Dodge Caravan

1 Answer

Head bolt torque spec for 98 caravan 2.4 thank you


Cylinder head bolt torque specs:
1st pass 25 ft-lbs
2nd Pass 50 ft-lbs
3rd Pass 75 ft-lbs
Final Pass tighten plus (+)1/4 turn = 90-degrees
BOLT ORDER:
10----6----2----3----7

9----5----1----4----8
START WITH 1 THEN 2 THEN 3 ....ETC.
END WITH 10 = 1ST PASS.

Nov 21, 2009 | 1998 Dodge Caravan

1 Answer

What is the sequence for the bolts on oil pan, for 2000 dodge grand caravan? What is the torque for bolts for oil pan for 2000 dodge grand caravan?


For the 2.8L there is no sequence. Torque for the bolts are 105 in.lbs.

For the 3.0L torque is 50 in.lbs. in sequence:




40be0ec.gif

30fedd0.gif
For the 3.3L and the 3.8L, no sequence but torque each bolt to 105 in.lbs.

Please don't forget to rate!

Jul 12, 2009 | 2005 Dodge Caravan

1 Answer

How do you replace egr valve in a 2005 dodge caravan


REMOVAL - 2.4L The EGR valve and Electrical EGR Transducer are serviced as an assembly.
  1. Disconnect vacuum tube from electric EGR transducer. Inspect vacuum tube for damage.
  2. Remove electrical connector from solenoid.
  3. Remove EGR tube bolts from EGR valve.
  4. Remove EGR valve from cylinder head adaptor.
  5. Clean gasket surface and discard old gasket. Check for any signs of leakage or cracked surfaces. Repair or replace as necessary

INSTALLATION - 2.4L The EGR valve and Electrical EGR Transducer are serviced as an assembly.
  1. Assemble EGR valve with new gasket onto the cylinder head adaptor.
  2. Loose assemble the bolts from EGR valve to EGR tube.
  3. Loose assemble the bolts from EGR valve to cylinder head.
  4. Tighten bolts from EGR valve to cylinder head to 22.8 N·m (200 ±25 in. lbs.) torque.
  5. Tighten bolts from EGR valve to EGR tube to 11.9 N·m (105 ±20 in. lbs.) torque.
  6. Reconnect vacuum hose and electrical connector to electrical EGR transducer.

Aug 03, 2008 | 2007 Dodge Caravan SXT Minivan New Cars

Not finding what you are looking for?
2000 Honda Civic Logo

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...