Question about 2001 Land Rover Discovery Series II

2 Answers

Replace fuses in rover 25 early 2001 model. my handbook is for the later model and the fuse numbers do not correspond with the fusebox numbers.

Posted by Anonymous on


2 Answers


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has written 2 tips or uploaded 1 video tip.

  • Expert
  • 69 Answers

The haynes manual sold at advanced auto or auto zone would give a full diagram of fuse location

Posted on Feb 04, 2010

Testimonial: "good stuff"


Melanie Earley

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 1 Answer

I need all the locations of fuses or fuse box for my 2001 Land Rover Discovery II with a diagram if possible

Posted on Sep 11, 2011

  • Melanie Earley Sep 11, 2011

    Sorry, I thought I was posting a problem not a solution



Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

97ford f150 4.6l 4x4 25maxi fuse keep blowing

Hi James Hollins, I want to help you with your question, but I need more information.

By "25 maxi," are you referring to fuse number 25, or a fuse rated at 25 amps? If the latter, which fuse number is it and in which fusebox, engine or interior (under dash)??

Fords are tricky with fuses. For some "user-UNfriendly" reason, the fuse-box only shows the fuse number, and you need to look in the owner's manual to find-out which component is protected by a given fuse by its number.

Once you know the components served by the blown fuse, you can isolate the cause of high current draw.

Tell me the fuse number and its block's location (interior or engine area), and we go from there. Thanks.

Sep 20, 2016 | Cars & Trucks

1 Answer

How do I know if my main computer box for my 1999 Land Rover Rangerover is burnt after a couple chafed wires grounds out on the body of the car and the car doesn't want to atart after that?

Number one put electrical tape around those darn wires! Chance are you burned out something. Follow wiring to computer to see if there is a fuse or more likely,a fuse-able link. Check to see if it is popped. If not you could have fried your computer. Check fuse box also for other burnt out fuses. Peace. God bless.

Nov 23, 2014 | 1999 Land Rover Range Rover

1 Answer

My imobiliser not working

There is a fuse in the under bonnet fusebox, - number 17 - that controls the immobiliser and also one in the fusebox inside the car - number 14 . They must be okay for the car to start. It may also be that the remote has become unsynchronised. You should put the key in the lock and lock the car door. Then press the lock button on the fob. Then unlock the door with the key and then press the unlock button on the fob. Are you sure the fob is sending a signal? If it has been dropped or knocked it may be damaged and this is quite common.

Feb 23, 2013 | 2004 Rover 25 1.4

1 Answer

I have a over 25 1.4 2003

thats the correct way the immobilisor automaticlly resets ,if you lock the door with the key then immobilisor isnt on ,older models you could remove fuse F1 to shut off immobilisor but not on the later 25 model

Jan 31, 2013 | 2004 Rover 25 1.4

1 Answer

No power at accessary socket

the fuse is marked LTR 15 amp fuse. it is located in the ip fuse block, fuse block is located drivers side of inst panel

Jul 01, 2012 | 2012 Chevrolet Spark

1 Answer

Need a fusebox diagram for a peugeot expert 2008 model

Sorry I can't provide the diagram you seek.

Aftermarket repair manuals usually include a generic diagram but there are often regional variations to this so the only reliable source is the vehicle's own handbook.

Sometimes there is a diagram on the inside of the fusebox cover with universal symbols acting as a guide to the function of each fuse and relay.

Jan 04, 2012 | Cars & Trucks

2 Answers

2001 Ford Expedition - starts, won't shift out of park, windows n

Check the #15 fuse in fusebox behind marked panel on left lower dash just below and left of steering column. This is only a 5 amp fuse but it controls a lot. This fixed our 2001 Expedition. 25 cents.

Dec 16, 2009 | 2001 Ford Expedition

1 Answer

Location of fusebox in 1992 BMW

The fuse box is located under the hood in the driver side corner closest to the windshield. It is about half a foot long by 4inches wide and is black. take the lid off, and each fuse is numbered... there is a legend on the reverse side of the lid that will tell u what each fuse corresponds to.

Jun 12, 2009 | BMW 325 Cars & Trucks

1 Answer

Multiple fuses failing in range rover

Please ensure that all your fuses are replaced. you already know the reason why the cut in fuses occurred.

rate this.

Mar 24, 2009 | 2001 Land Rover Range Rover

3 Answers

1999 Jetta fuse box

The fuse box in located on the left side of the dash, between the door and the dash.

Oct 13, 2008 | 1999 Volkswagen Jetta

Not finding what you are looking for?
2001 Land Rover Discovery Series II Logo

Related Topics:

951 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers


Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides