Question about 2005 Chrysler 300

1 Answer

Ok i have a 2005 chrysler 300 touring and it has 123000 miles on it and the engine is a 3.5 v6 engine, I have had so much work done on it, and for some reason the oil is always low even when i get a oil change i have had the oil leak fixed twice and now i dont know whats wrong. can you help

Posted by quinhartquin on

Ad

1 Answer

Jeff Armer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chrysler Master
  • 15,575 Answers

Burning oil ? leaks on the ground still ?

Posted on Feb 10, 2018

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: Perform Service Light comes on

This is a setting that can be reset to 2000 miles - when it counts down to 0 you get the "Perform Service" alert. I believe if you use the Step function you will see "XX miles to Service" Use the reset button to set this back to 2000.

Posted on Mar 08, 2009

Ad

sitruc2000

  • 46 Answers

SOURCE: how do i turn off my malfunction indicator light?

If it is an error produced by the engine control system, you should be able to clear it using an OBD II reader. OBD=on board diagnostics. You have to find the plug for the unit, but just plug it in and the machine will read it. I usually borrow one from the local car parts store--give an ID and they will let you temporarily borrow it. Make sure you read the error code as well. There may be some interesting info about what produced the error message. Good luck.

Posted on Apr 09, 2009

bunnydawg

Roberta Smith

  • 5158 Answers

SOURCE: I SPILLED CHAMPAGNE ALL OVER THE SHIFTING AREA IN

yeah yeah yeah lol... tell you what ... i'll make it so you can rate this... please rate it a fixya.... and if you want to email me.... add @hotmail.com to my name

take care
glad it worked out

Posted on Apr 16, 2009

bunnydawg

Roberta Smith

  • 5158 Answers

SOURCE: Chrysler 300 3.5 v6 Slight engine knock - oil always changed

it is likely the coil pack failing. if you don't know how to test it perhaps have it tested or replace it yourself. you can get them fairly inexpensively at the local wrecking/recycling yard.

Please take a moment to rate this solution. thanks

robert

Posted on Sep 02, 2009

Outrider26

  • 7 Answers

SOURCE: I have a 2005 Chrysler 300 Touring my engine light

The Chrslyer engines are prone to carbon build up in the engine when they are not driven hard. When the misfire occurs the engine runs rough, the car shakes a bit, and the check engine light comes on. The good news is that this is a recognized issue at Chrslyer. There is a Technical Service Bulletin (TSB) out for this. Synchronicity in the Universe being what it is, my car is in the shop at this moment being serviced for this very same thing. It is a 2002 300M Special Edition with 57,000 miles on it. I haven't been driving it as much because I started taking a commuter train to work and when I do run it, I do not let the engine get up to operating temperature nor do I run it at highway speeds - thus the carbon build up. You may simply need to have the carbon blown out of the engine. Talk to a Chrysler Tech about a TSB for carbon build up leading to intermittent engine misfires and see if this might be at the bottom of the problem.

Posted on Sep 24, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes I/P lights to blink when put in gear?


2005 Chrysler 300 2.7l Throttle Body Control Warning Light ...

www.cargurus.com > Questions > Chrysler > 300

CarGurusAug 7, 2014 - 2005 Chrysler 300 2.7L throttle body Control warning light or "RED ...bolt starts flashing and the car gets stuck in limp mode or second gear.Missing: p

PCM/TCM Software Updates Will Address Shifting Problems ...

repairpal.com > Problems > Chrysler > 300
Chrysler 300 PCM/TCM Software Updates Will Address Shifting Problems. ... If you experience rough shift and/or shuddering during gear shifting, software ... Car would not go over 20 mph and check engine light along with ABS/BAP light ... Once he put the new battery in the car ran fine for a while and the problems all cam ...Missing: p

ECM with bad connection, causing engine to stall - 2005 ...

? 1:08
https://www.youtube.com/watch?v=IgLe0t5may8
Oct 23, 2011 - Uploaded by SignedOnAsJoe
Check NHTSA chrysler extended the warranty on fuel tanks. ...Any one knows how can I put a used ecm in my 2005 300 do I need to buy new ... How to view fault codes Chyrsler 300 HTWL - Duration: 1:22. by Leo P 28,908 views ... Rough Run, Stumble or Stall, Check Engine Light-How To Check Vehicle ...Missing: blink

Dec 19, 2015 | 2005 Chrysler 300 Touring

1 Answer

2005 chrysler 300 head gasket backwards?


If you have put the head gasket on wrong the problems will be no oil to the rocker gear--- over heating engine --oil leak down the engine block from under the head

Jan 27, 2014 | 2005 Chrysler 300 Touring

1 Answer

Should you do a transmission flush on a chrysler 300


If you want it to last 2 or 3 hundred thousand miles yes and have it done every year if you can afford it. You wouldn't except your engine to last if you never changed the oil

Feb 23, 2013 | 2005 Chrysler 300

1 Answer

Is it a hard job to replace the egr vavle on a 2005 chrysler 300 3.5 engine


the egr valve can be changed from below but the left bolt must be done blindly by feel, (use a small mirror,) undue the 2 bolts and pull it out from the intake, careful to make sure the gasket on the end of the tube comes with it;
the 2 bolts that hold the egr on also has a metal gasket;
the hardest thing is to disconnect the electrical plug from below that connects the egr valve, - do not do this if you have no mech experience;

Mar 26, 2012 | 2005 Chrysler 300

1 Answer

It is stuck in park


ok first step is to take off the rubber cover (change holder) on the shifter. there is a pink tab push the pink tab down with a long screw driver. If it still is stuck in park the interlock spring is broken in the shifter u would need a shifter assembly 99% of the time this is the problem good luck.

Oct 20, 2009 | 2006 Chrysler 300

1 Answer

My car is having the same problem engine valve


If its a Chrysler factory problem then yes but if its not then its yours but the lifter problem can be fixed by removing rocker covers and see if its not getting the oil to them as it could be the oil filter needs changing
Check it out first before jumping up and down at them .
HOW many miles has it done Ron

Oct 18, 2009 | 2006 Chrysler 300

1 Answer

How to change spark plugs in a 2005 chrysler 300 limited 3.5liter v6


you need to remove the intake manifold to get to the right 3 plugs this is best left to a pro if you have never done anything like this before NOTE the plugs do not need to be changed till 100K

Sep 16, 2009 | 2005 Chrysler 300

2 Answers

125 miles to service says the computer, what does this indicate? what part will need service? on my 2005 Chrysler Pacifica 3.5L V6 Touring?


this is telling you that the vehicle is due for minor service such as oil change and filters if you have already done this recently the service light needs to be reset for the new cycle generally a cycle is anywhere from 3000-5000 miles depending on manufacturer. take to dealer and have them reset it or your owners manual will walk you through resetting

Aug 27, 2009 | Chrysler Pacifica Cars & Trucks

2 Answers

My high beam,windshild wipers and horn do not work


check fuses , relays and body control module , is check engine light on?

Jul 16, 2009 | 2005 Chrysler 300

Not finding what you are looking for?
2005 Chrysler 300 Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14852 Answers

Mike

Level 3 Expert

4372 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...