At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
was the radio and interior light working before you removed the fuse for the horn? In the process of removing the fuse for the horn, you must have mistakenly tempered with the fuse for the radio and interior light.
So I would suggest you go back to the fuse box and deep them in properly because the interior and radio fuse might not be contacting properly.
Can you turn on the lights with the Interior light switch?. If a light works, obviously the fuse is good. You will need a wiring diagram and a test light to figure out where to start.
The fuse for the interior lights has a yellow plastic holder
covering it. Full the holder all the way out, fuse and all, with a needle nose pliers.
Replace the fuse. Disconnect the power to the radio you put in before you do this. Replace with new fuse. Check lights. If light work, plug in radio. If fuse blows, radio connection is bad (grounded hot wire). Fix wiring, replace fuse, and try again.
You could also have messed up the multi-function switch
(turn signal switch). EVERYTHING go's through this piece of crapo switch, and it costs a fortune to replace. Do the wiggle test on the switch, wiggle it while trying the things that do not work, front to back of truck, NOT up and down like your turning the switch on, the opposite way, front to back of truck. If things flassh off & on that stopped working, yopu found the problem. DONT pusy too hard, push gently on end of stalk, there is a lot of leverage there!
×