Well you have spark plug wires that run to them. It's a 4.7L so you will have 8 of them. They run into the engine block I will post a picture for you.
Okay so make sure when you take them off you know what wire goes where from the distributor cap. Sometimes the book isn't correct if the car has had the electronics redone. Take them out with a spark plug socket and replace but don't tighten too much. Tight but don't crank on it. Also if you're doing the plugs maybe consider doing the wires, cap, rotor while you're at it. If you have questions just ask and good luck!
1,109 views
Usually answered in minutes!
×