Question about 2004 GMC Envoy

1 Answer

2004 GMC Envoy XUV mid-gate window won't roll up

My 2004 GMC Envoy XUV mid-gate window worked fine one day, then wouldn't roll up. The motor runs, but will not roll up. Any solutions??

Posted by terrra on

Ad

1 Answer

Bruce Hathcock

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,600 Answers

Be sure the gate is fully closed or it will not roll up if it is firmly in place and still does not go up you will have to remove the cover and see if the actuator plastic has broken off from the switch, it also could be a bent rod and or the switch is bad. Check fuses as well just to be sure before going to all the other work to pull cover off. Hope this is helpful and thanks for using Fix-ya.

Posted on Jan 19, 2010

  • Christopher McLaughlin Dec 09, 2013

    i need a how to video on replacing the regulator

×

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix my rear tailgate window


check the fuse/relay. if it is neither of these check the switch with a multimeter. If you can hear the motor trying to move the glass when you try the switch it may be the regulator needs attention. It may be the motor needs to be replaced.

check fuse and relay along with the switch first then the regulator and motor afterwards. Replacing the small electronics is obviously easier than having to open up the tailgate to check the mechanics of the winedow.

Sep 13, 2015 | 2004 GMC Envoy XUV

1 Answer

Tail gate on 2004 Envoy XUV


The tailgate assembly requires regular lubrication and adjustment in order to keep functioning properly. If it has stopped functioning, follow the manufacturer's recommendations for periodic lubrication and adjustment.

May 12, 2015 | 2004 GMC Envoy XUV

1 Answer

I have a 2004 gmc envoy. the glass rolled down with the switch but will not roll back up. I hear the motor running for up and down, but the glass doesnt move. So the interior wouldnt get wet I pulled the...


The cable in your window regulator has snapped, this means you need to remove the door panel and replace the regulator, sometimes they come with the motor as well please rate good luck

Aug 01, 2011 | 2004 GMC Envoy

2 Answers

Replacing 2004 gmc envoy xuv rear wiper blade


Replace the blade and the blade holder. These days everything but the arm gets changed....and gone are the days of just replacing the rubber...

Jul 19, 2011 | 2004 GMC Envoy

1 Answer

04 GMC Envoy XUV midgate window fell won't come back up; motor runs ,window won't move


The same thing happened to my '04 XUV. Discovered broken white nylon/plastic that retains the end of the lift cable. Ordered a new lift gate motor/mechanism assembly ($250) online and replaced it myself. Be sure to buy a new limit switch ($13) also. I did not and regretted it because you must remove the old limit switch from the old motor assembly so you can re-assemble it to the new motor assembly. While removing the old switch from the old assembly, I broke it. Had to then order a new switch. The cost to ship the switch separately was more than the switch. The whole thing did not really take that long and was surprisingly easy. It works great now.

Dec 13, 2010 | 2004 GMC Envoy

1 Answer

Tailgate will not open at all, i can unlock the doors, but the end gate will not unlock, how can i open it. 2004 envoy xuv


do you have the tailgate with the window in the upper half and does the window open?

Oct 11, 2010 | 2004 GMC Envoy

2 Answers

How exactly do you take the skin off the mid-gate on a 2004 GMC Envoy XUV to access the glass or a to fix gear on the window lift? I tried by removing the center screw, and it won't budge. Are there any...


door skin is the metal part of door --door panel is usually removed to access the inner workings --remove the panel screws and pry gently to release the clips and panel comes off

Jul 14, 2017 | 2004 GMC Envoy

1 Answer

2004 GMC ENVOY XUV, spare tire system stopped working


The tools are under the second row seats. The hole for the spare tire lowering mech. is above the rear bumper when you lift the tail gate. Put the proper tool down the hole, turn counter clockwise, lowers spare. Reverse to bring up.

Apr 05, 2009 | 2004 GMC Envoy

2 Answers

2004 envoy xuv tailgate problems, will not latch or open sideways. I have a 02 Envoy SLT the rear liftgate Dose not have power. the wipers dont work the Lock dont work I can not program my keyless entry....


I also have a 2004 GMC XUV. My gate would go down but not swing open. In trying to fix it, the gate then refused to go to the flat position.I have removed the cover plate on the gate and found the one of the solenoids loose from its mounting. Resetting the computer by disconnecting both battery leads and holding them together for ten seconds worked to restore function to the gate going flat, but the swing still does not work. I believe it is a bad solenoid or motor for the bottem left latch pin.

Feb 24, 2009 | 2004 GMC Envoy

1 Answer

Envoy XUV light in overhead console switch is out how do I replac


any good auto parts store has bulbs for it and some will even show you how to replace it .

Dec 17, 2008 | 2004 GMC Envoy

Not finding what you are looking for?
2004 GMC Envoy Logo

Related Topics:

1,511 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...