- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Digital Clock The time is displayed continuously when the ignition is switched to II or III. At all other times, push in on the lid to display the time. To adjust the time: 1. Lower the lid. 2. Push the minute button (M) and hold it until the numbers advance to the desired minutes. 3. Push the hour button (H) and hold it until the numbers advance to the desired hour. 4. The RESET button allows you to synchronize your clock to the closest hour. If the time on the clock is before the half hour, pressing the RESET button will return the time to the previous hour. If the time is beyond the half hour, the RESET button will change the time to the next hour. NOTE: Be careful not to push the H, M or RESET buttons accidentally. Pushing any of them will change the clock's time setting.
Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust the hours by turning the right side TUNE/ SCROLL control knob. 3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Press the TUNE/SCROLL control knob to save the time change. 5. To exit, press any button/knob or wait five seconds http://www.chryslercommercialvehicles.com/jeep/download/pdf/manuals/2014-Patriot-OM-1st.pdf page 240
When you open the drivers door there is a fuse box on the dash where it meets the door. Pull off the cover and there will be a red reset button. Turn the car on but do not start it. Once the power is on tap the reset button until the chane oil light is flashing, the hold it down until it goes off. This is how you also reset the check tire pressure light.
I am seeing this problem a lot on this board. I had same problem. Change the TCU unit under the passenger side floor board (pull up carpet and you will see it, easy to change). Got a used one from a junk yard--lot cheaper.
hi from uk to reset clock ? there are two buttons/stalks? on the speedometer clock the left one is for trip reset and the right one is for clock reset/alter time to alter twist left for hrs reset and right for minutes it springs back to neutral when you let go hope this helps ?