Question about 2005 Dodge Durango
First thing to do is make sure it is full of washer fluid. I know, who would not check that? You would be surprised. Ok, now we know it is full so why is it not working? Did you check the fuse. Normally you can hear it try to work by having the hood open while you stand there and have someone try it. It is full and fuse is good and it is trying to pump then either the pump is working but not really pumping anything or what I suspect is more likely is that the spray nozzles are clogged with wax. This is very common and I have seen it time and time again. Remove one of the rubber hoses from a spray nozzle and see if it it pumping out fluid. If it is not, then the pump is bad and must be replaced. It it is pumping fluid then the nozzles are clogged. Use a fine needle to clean out the nozzles. You may have to take the nozzle off in order to clean it throughly. More than likely once you probe inside the nozzles with the needle they will start working. If you end up having to remove the nozzles, and they are metal, which they normally are, you can place them in a pan of boiling water. This will for sure clean them out. The hot water will soften the wax and make it easy to pick and blow out. Have a great 2010, and good luck getting your washer fixed.
Posted on Jan 10, 2010
Check the fuse, if ok, find the washer tank, check fluid is not having limestone build up that can block the washer pump, remove one of the pipes from the nozzle and check if the pump is giving fluid, if not you will need to replace the washer pump, if it does the nozzles are blocked and you can use compressed air to clear them.
Posted on Jan 10, 2010
SOURCE: 2005 Dodge durango shuts down.
I had a similar problem with 99 Durango.
Replaced PCM with refurbished "brain" from online Florida company and no problems since. You may want to google for refurbished PCM and call the guys who sell them -- they were helpful to me and my fix was 3 screws and < $300.00.
Posted on Apr 08, 2009
SOURCE: 2005 Dodge Durango
The p0300 What does that mean?
Basically this means that the the car's computer has detected that not all of the engien's cylinders are firing properly.
A P0300 OBD DTC code indicates a random or multiple misfire. If the last digit is a number other than zero, it corresponds to the cylinder number that is misfiring. A P0302 code, for example, would tell you cylinder number two is misfiring. Unfortunately, a P0300 doesn't tell you specifically which cylinder(s) is/are mis-
The p0430 What does that mean? Basically this means that the O2
downstream of the catalytic converter on bank 2 is detecting that the converter is not working as efficiently as it should be (according to specs). It is part of the vehicle emissions
Posted on Apr 26, 2009
Tips for a great answer:
Nov 14, 2016 | Dodge Cars & Trucks
May 24, 2015 | 2005 Dodge Caravan
Dec 16, 2013 | Dodge Durango Cars & Trucks
Dec 10, 2011 | Cars & Trucks
Jul 20, 2011 | 2000 Dodge Durango
Jul 12, 2011 | 2005 Dodge Durango
Dec 01, 2010 | 2004 Dodge Durango
Nov 08, 2010 | 2005 Dodge Durango
1,007 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: