Question about 1998 Ford Crown Victoria

1 Answer

I have my #5 piston misfiring in my police interceptor - i bought a new coil pack but cant' see labels telling me which exact spot the #5 piston is at Could any one help me find how or what spot is the correct #5 spot? Thanks in advance

Posted by tkedrowski on

Ad

1 Answer

John Fears

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 150 Answers

Engine 4 8
3 7
2 6
1 5
pass coil drivers coil
6 3 7 2

1 5 4 8

Posted on Jan 02, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What causes engine misfires to stay after new plugs and coil packs?


Try swapping the coil packs around - like swap #1 with #2, and swap #6 with #5, see if the misfires MOVE with the coil packs swapped to the new cylinders or if they stay with the cylinders. If they move with the coil packs, the new coil packs are bad. If they stay with the cylinders, there's a problem with those cylinders. You DID replace that camshaft sensor, right?

Have you checked your #1 and #6 injectors?

Aug 07, 2014 | BMW 528i Cars & Trucks

2 Answers

Hi, I'm getting codes 136 02 sensor bank 1 sensor 2 along with 301 cylinder 1 misfire and 304 cylinder 4 misfire. Could the 136 be caused by the misfires ? I'd like to just swap out the plugs, but, they...


I wouldn't worry about the 02 code it will clear when you replace the coils. to be positive that the coils are bad, swap them with another cylinder and see if that cylinder misfires. 90% of the time it's the coil. Let me know
Randy

Nov 28, 2010 | 1996 Ford Crown Victoria

1 Answer

Trying to locate spark plugs on 99 crown vic police interceptor engine


They should be mounted down in the cylinder heads, you'll need to remove each coil pack. A long extension and 5/8in spark plug socket and an extendable magnet will help. Also, you may need to remove the fuel rail to get to move the coil packs.

Oct 17, 2010 | 2000 Ford Crown Victoria

1 Answer

I have a 2002 TrailBlazer with the straight 6,diognostic check said #3 cylinder was dead or misfiring, also map sensor showed up. #3 cylinder was misfiring, so to test the coil pack I swapped #3 coil pack...


did you replace only one spark plug? that can cause issues because of differences in resistances between cylinders. also, did the map code stay off after replacing
?

Feb 28, 2010 | 2002 Chevrolet TrailBlazer

2 Answers

My check engine light came on and my fluid levels are ok. What else should i check. 2000 crown victoria police interceptor


Could be many different things. Take it to a dealership or autozone and have them hook it up to their hand held computer. They will be able to tell you exactly what is wrong. A lot easier then just guessing.

Aug 04, 2009 | 2000 Ford Crown Victoria

4 Answers

Cylinder 4 misfire on a 2000 crown victoria interceptor


first cylinder 4 is the last on the passenger side . first pull the coil out and check if there is water where the plug is. if there is take the water out and dry up the coil. if you find water you got a crack manifold or a bad intake manifold gasket. if there is no water replace the coil. good luck

Apr 10, 2009 | 2000 Ford Crown Victoria

2 Answers

2004 Interceptor, will replacing the heads fix?


Make sure to Replace the Rings also and they will be Fine unless the Heads are Warped.

Jan 25, 2009 | 2004 Ford Crown Victoria

2 Answers

Ford Crown Vic p0300 random cylinder misfire


take a look at the EGR valve it could be either vacum controlled or electronic either way what seems to be the problem is that the valve is stuck in the open position until the engine warms up you can gently tap the egr valve with a small hammer or a screw driver and you can see that it runs smooth, now if the egr valve is vacum controlled replace the valve. if it is electronoc controlled replace the valve and the module for the egr valve.

Nov 02, 2008 | 2000 Ford Crown Victoria

Not finding what you are looking for?
1998 Ford Crown Victoria Logo

Related Topics:

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...