Question about 2003 GMC Yukon Denali

2 Answers

2005 GMC Yukon rear wiper won't reset itself. We can use it once and then have to manually place it back on its rest support. After restarting the engine we can then use it one time more. Is there a relay out somewhere?

Posted by wall_keri on

Ad

2 Answers

lee74conn

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

PUT A NEW GROUND WIRE IN THE REAR WIPER MOTOR

Posted on Sep 03, 2010

Ad

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

2003 GMC Yukon- Rear wiper stopped working. Buzzing/humming noise coming from the wiper motor. Tried replacing it, but got the same result.(buzzing). Returned new motor. Checked 2 fuses one under the dashboard and one under the hood. Both were good.

Posted on Mar 03, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to add ground wire to rear wiper on 2005 Yukon


Why do that?

You know you can ground the
outer motor case if you like

What is the problem?

Aug 12, 2014 | 2005 GMC Yukon

1 Answer

2005 gmc yukon rear window motor buzz, new one does same thing


sounds like you may have a bad ground on the motor .even a brand new motor wont work if it has a poor ground check your connections

Feb 23, 2013 | 2005 GMC Yukon Denali

1 Answer

2005 GMC BACK HATCH WON'T OPEN


It sounds like the lock actuator has failed or has a poor connection which won't allow the latch to release. What you will need to do is remove the inside rear hatch panel to access the lock actuator. Once you get to the latch use a flat screwdriver to release the latch being careful not to damage the glass.

-----------
Click this link below for more troubleshooting:-- http://technoanswers.blogspot.com/2011/09/rear-hatch-wont-open-on-2005-gmc-yukon.html -------- This will help.Thanks.Helpmech.

Sep 09, 2011 | 2005 GMC Yukon

1 Answer

Rear wiper motor has power won't wipe 06 gmc yukon,makes a ticking noise


if you have power to the motor and it still is not working then I would say that the motor itself is bad and at fault. replace it and all should be good.

c...

Jan 04, 2011 | 2006 GMC Yukon Denali

2 Answers

Wipers won't stop stop after being turned on .04 gmc yukon xl......the suv has to be off for 10 minutes or more for it to reset..frustrating


It is the wiper motor itself,it has the contacts in it to switch to the rest position upon turning it off.

Apr 25, 2010 | 1996 Volvo 960

1 Answer

Rear access will not unlock 2005 Yukon Denali


I found this URL on the internet http://www.chefseattle.com/blog/site-news/suburban-rear-liftgate-wont-unlock-how-to-fix/ that might fix your problem. Also consider doing my fix rear wiper how to tip for 2005 Tahoe before that fails, while panels are removed.

Apr 19, 2010 | 2005 GMC Yukon Xl Denali

1 Answer

Remove wiper blade


Do you mean the wiper blade or the wiper arm?

The wiper blade should have a small tab or lever on the underside of the hinge where it attaches to the arm. Use a small screwdriver or a pick (etc..) to gently pry the lever upwards to pull the locking tab out of its corresponding hole on the wiper arm. Once the tab is up, firmly grasp the wiper blade and pull towards the base of the wiper arm. Sometimes they stick a little, just be careful not to bend the wiper arm.
If you are looking to remove the wiper arm, remove the plastic cap at the base of the wiper arm to gain access to the nut below. Using either a 13mm (1/2 inch) or 15mm socket (depending on the model) remove the nut by turning counter-clockwise. Once the nut is off, place your hand in the middle portion of the wiper arm and firmly push downward, being careful not to bend the arm. What you are trying to do is rock the arm off of the wiper motor stud. Be sure to mark where the wiper blade rests on the windshield before removing it, so you can reassemble it in the same spot when you put it back together. Use a grease pencil or something else that you can clean off later.
Hope this helps!

Mar 26, 2009 | 2006 GMC Yukon Denali

1 Answer

Rear Wiper Quit Working


It is the Motor. This is a VERY Common GM Problem that they have not Fixed since 1990. You will need to remove the Rear Door Panel to Access the Motor.

Jan 20, 2009 | 2005 GMC Yukon

Not finding what you are looking for?
2003 GMC Yukon Denali Logo

966 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Ryan Lutton
Ryan Lutton

Level 3 Expert

1256 Answers

john h

Level 3 Expert

23515 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...