Cvc joint on 2000 dodge

Its common in those cars you need mechanic exp to do it your self its not a walk in the park,Remove center cap from wheel or remove hubcap this may require wheel removal
Have the car sitting on the ground on all wheels
Remove spindle nut from end of axle through center of wheel (it's really hard to do with the car in the air)
Jack up corner of car
Remove wheel
Remove castle nut that holds lower control arm to spindle
Remove (I think, may be 14mm) bolt that secures bottom of damper fork to lower control arm
Use mallet or hammer to break control arm free from spindle
Swing up and out of the way
Bang end of axle through back side of spindle to free it from the hub
Wrap pipe wrench jaws around axle between axle cup and tranny housing (or intermediate shaft housing, depending on transmission)
Tighten pipe wrench, but leave a bit of slack
Kick pipe wrench handle so axle pops free
Remove axle