I am replacing only the low beam passenger side bulb. I know I must not touch bulb, but how do I get at it? What about the high voltage the light label indicates? Only when light is on? No residual to drain off? ThanksI am replacing only the low beam passenger side bulb. I know I must not touch bulb, but how do I get at it? What about the high voltage the light label indicates? Only when light is on? No residual to drain off? Thanks
does your car have single bulbs if so you just have to replace one it has both high and low beams in side also be careful changing them if you use bare hands oil from your skin will cause the bulb to blow wear plastic gloves or clean bu;lb off with an alcohol swab and dry it with a clean clothdoes your car have single bulbs if so you just have to replace one it has both high and low beams in side also be careful changing them if you use bare hands oil from your skin will cause the bulb to blow wear plastic gloves or clean bu;lb off with an alcohol swab and dry it with a clean cloth
AnonymousMar 22, 2014
the power won't come on the cd playerthe power won't come on the cd player
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Dennis, Make sure the low beam bulbs are OK, first. if fuses and grounds OK, it will be your multi switch, which you nay be able to disassemble and clean contacts. Low Beams Not Working Resolved
Your best bet is just go to your nearest junk yard and get both headlight assemblies you can't just buy the warmer piece you have to purchase the whole thing
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
support.
If you have one adjustment screw, it will control your vertical aim.
If you have two adjustment screws, one will control your vertical aim
and the other will control your horizontal aim
Park
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
How to Shift my headlight beam from position. from I replace my headlight it's spatting directly on the ground..What can i do to change it from position
I am replacing only the low beam passenger side bulb. I know I must not touch bulb, but how do I get at it? What about the high voltage the light label indicates? Only when light is on? No residual to drain off? Thanks
does your car have single bulbs if so you just have to replace one it has both high and low beams in side also be careful changing them if you use bare hands oil from your skin will cause the bulb to blow wear plastic gloves or clean bu;lb off with an alcohol swab and dry it with a clean cloth
the power won't come on the cd player
×