At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Fog lamps work daytime running lights don't work, high and low beams. Door locks don't workFog lamps work daytime running lights don't work, high and low beams. Door locks don't work
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check for a damaged wire for the low beam. Also wouldn't hurt to check the ground wire as the high beam will try and ground through the low beam but not visa verse
If your high beams work and your low beams do not work... try changing the light bulbs first. The low beams can burn out and the high beams still work.
ok, first ,, check all the bulbs again, and *** make sure that your hands never touch the actual bulb, these lights will turn the oils from your hands into cooking grease when it comes to these bulbs and cause them to blow out much to early on in their life span, , next,, Pull the light switch ( high beam switch towards you for a quick flash of the head light high beams,, if this doesn't make the high beams come on, your problem is going to be in the switch itself ( what your calling the high beam/turn signal lever) before going to that extreme though,, if you have a junk yard near you, go pull one of the relays off a junked vehicle, and stab it into your system one at a time, it could be something as simple as a relay heating up and disconnecting prematurely due to heat ,, if you don't have a junk yard that you can grab a relay,, here is a link that shows how to check them, But its time consuming http://www.youtube.com/watch?v=C8t25GjZ6i4&NR=1
You have a bad mutifunction switch or headlight switch is going bad and is over heating then cooling off comming back on Have a mechanic check it cause there are other things that can cause this. Since it's not blowing a fuse at this time I would say the head light switch is bad.
possibly head lamp switch. daytime running lights on separate circuit and use the high beams at reduced voltage. does flash to pass work? that's high beams too. do high beams work?
Fog lamps work daytime running lights don't work, high and low beams. Door locks don't work
×