Hazar fuse location on 1993 subaru sedan. can not shut off the hazard lights. looking for fuse box schematic. Any help would be appreciated. Thanks,

Question edited for clarity.
Question moved to sub category.

check fuse Stop/Haz Haz. Flasher, Seat Belt Buzzer, Stop Lmps., A.B.S. Memory and the flasher itself.
https://www.google.com/search?q=1992+chevy+suburban+hazard+flasher+location

Fuse Box Diagram Chevrolet Suburban (GMT400; 1993 ...

https://fuse-box.info > chevrolet > chevrolet-suburban-...
Fuse box diagram (location and assignment of electrical fuses and relays) for Chevrolet (Chevy) Suburban (GMT400; 1993, 1994, 1995, 1996, 1997, 1998, 1999)

There are several components of your 1997 Subaru Outback that can cause your tail lights to stop functioning correctly. To help pinpoint the cause of the problem, it would be very helpful to also check your front marker lights. If the marker lights are working, then we know that the problem is not the headlamp switch or the tail and illumination relay (located in the fuse and relay box).

The components to check are:

> Fuse #23 (20 Amp) in the Main Fuse Box.
> Fuse #5 (10 Amp) in the Fuse and Relay Box
> Tail And Illumination Relay
> Headlamp Switch

I take it that either the inside of the fuse box lid is unreadable or is missing. What I would do is fine the closest junk yard and find a car like yours and look inside to see if the diagram is still there. Otherwise you'll have to buy a manual from a parts store. Sometimes if your lucky, you can go to the dealer and they will actually make a copy of the diagram page you need. I hope this info helps.

locate the fuse from the fuse box and replace it with exact fuse. it would help

no it is hazard flasher canister thats in the fuse box

Both the turn signal and hazard warning flashers are mounted on the fuse panel.

REPLACEMENT
To remove a relay, simple pull the relay out. When installing a relay, make sure the terminals on the relay line up with the terminals in the fuse panel.
Most of the replaceable fuses for the electrical system are located on the fuse panel under the instrument panel, to the left of the steering column. In addition to the plastic fuses installed in the fuse box, there are 1 or more circuit breakers and a flasher relay.

For access to the fuse panel, remove the fasteners from the lower edge of the cover, then pull the cover downward until the spring clips disengage from the instrument panel. On the base models, the cover simply snaps on and off.

The locations of various fuses are illustrated in the owner's manual, and in some cases, on the cover of the fuse panel (in the pic check inside the circle).



Hope that helps.

Replace the Hazard relay it is located in with the fuses it looks like a little box or is a small round component mixed in with the fuses.

In fact im certain thats your problem.
It is a seperate switch for the Running Lights.
Its in a fairly obscure location unless you know where to look.

Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.

Replace your flasher. Located on your fuse box under the dash. Turn the flashers on to locate it. Pull it out and replace.

take it to an autozone they will scan the codes for free and i suspect it's the headlight relay in the fuse panel located in the engine compartment near the battery

Robert

Please take a moment to rate this solution thanks