Set parking brake and use jack stands if you raise the vehicle.
1. Remove engine front undercover.
2. Warm up engine. This is need for the oil to flow freely when draining.
3. With engine stopped loosen oil filler cap and then remove drain plug.
4. Drain oil into a drain pan.
5. Install drain plug with new washer. Tighten to 25 ft-lb.
6. Remove oil filter using a filter wrench.
7. Make sure the surface is free of foreign materials.
8. Apply engine oil to the seal and install your new Nissan filter. Tighten filter 2/3 turn after contact with surface or 13 ft-lb.
9. Refill engine with 6 quarts of oil.
10. Start engine and check for leaks.
11. Stop engine and check oil level and add to the full line.
12. Reinstall engine front undercover.
SOURCE: how do i reset the engine oil light on my 2004
usualy you turn the ke switch on the on set hold the reset mile button turn key off but still hold reset button then turn key to the on set again and hold the mile reset button for 10 to 15 seconds or untill the check engine light comes off . it worked for me on an older model nissan hope this will help out
274 views
Usually answered in minutes!
×