Headlamp relay maybe . Located in the under hood fuse / relay box . Do you know what a relay is and how it works ? There is two relay's , one for low beam an one for high beam .
Relays Understanding Diagnosis and Testing Relayed Circuits Pt1
SOURCE: Hyundai elantra headlights and dashboard lights
I've had my elantra for a year and a half and Im on my 5TH pair of halogen headlight lamps what's the problem??
SOURCE: Adjusting the low beam headlight
its all the same the headlight is a complete unit you adjust both/ look for screws behind the headlight one each side one is for horizontal annd the other is for vertical Please rate my response thank you very much
SOURCE: How to replace headlight bulb hyundai elantra 2004
yes , you need to remove the headlight cover from the back after u move the bulb conector then there is a holder for the bulb u need to push down then move.
i hope it help ,,,, thanx
SOURCE: Can't find headlight adjustment screws
They nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.
Park
your car on a level ground 30 feet from a wall and measure the height
from the ground to the bulb and mark on a wall (do this for highs beams
and low beams if the bulbs are separate, if highs and lows are the same
bulb, only do it for the lows)
If the headlights read VOR, then
aim the brightest part or cutoff part just below the mark on the wall.
If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Testimonial: "The adjustment screw (for passenger side) is located between the battery & frame's second hole. Turning counter-clockwise, it adjusts downwards,Thanks"
232 views
Usually answered in minutes!
×