Two clips hold the headlight in place at the top...remove these and the headlamp will move forward enabling you to replace the halogen bulb (9007 at CTC)
EASY FIX, POP THE TOP PLASTIC COVERING OFF BY POPPING UP THE LITTLE BUTTONS HOLDING IT DOWN. JUST PULL THEM UP IN THE MIDDLE BY THE LITTLE ROUND TOP THEN, PULL THE WHOLE PIECE OUT BY THE FLAT BOTTOM OF THE PIECE, ONCE REMOVED, THERE ARE TWO BOLTS HOLDING THE HEADLIGHT IN PLACE, REMOVE THOSE TWO BOLTS AND THE WHOLE HEADLIGHT COMES OUT EASILY, JUST TWIST THE HEADLIGHT BULB UNIT A LITTLE UNTIL IT COMES LOOSE THEN, JUST PULL IT OUT OF THE HOLE IT'S IN. PULL THE LITTLE CLIP UP THAT'S HOLDING THE ACTUAL BULB AND HARNESS IN THE SOCKET AND THE QHOLE THING COMES OUT WITH THE BULB INSIDE, REPLACE THE BULB WITH A NEW ONE AND REPEAT STEPS IN REVERSE ORDER TO REPLACE BACK IN THE HEADLAMP AND YOUR DONE. REMEMBER, DON'T DON'T DON'T TOUCH THE NEW BULB AT ANY TIME DURING REPLACEMENT, I DON'T KNOW WHY BUT, IT'S A VERY BAD THING TO DO ACCORDING TO THE EXPERTS. I JUST PERFORMED THIS FIX YESTERDAY AND SO FAR EVERYTHING IS JUST FINE, BUT, I DID FIND OUT THAT I DON'T HAVE WORKING TAIL LIGHTS. THE BRAKE LIGHTS WORK BUT, NOT THE TAIL LIGHTS WHEN THE LIGHTS ARE TURNED ON. BULBS ARE NOT BLOWN AT ALL AND I DON'T SEE ANY CUT OR BROKEN WIRES, I NOTICED THAT MY DASH LIGHT IS OUT ALSO BUT, THERE ARE NO FUSES BLOWN AT ALL ANYWHERE. CAN ANYONE HELP? CALL FLOYD @ 443-475-7093 ANYTIME DAY OR NIGHT.
1,071 views
Usually answered in minutes!
replace a headlight
×