I recently bought a 2003 chevy blazer. It has the two piece rear hatch, with the window that folds up and the tailgate that folds down. The window didn't have the supports to hold it up, so I bought them from the local hardware store. The bottom attaches with a ball into a joint on the piston, but the top has a open circle that looks like a bolt and nut hold it together, however when i asked the guy at the store what held it in place, he said he had no idea and couldn't help me. Could anyone please tell me what it is I need to hold them in, and where to find them? Thank you.
What you need to do is go to a automotive part store and they will look them up per your vehicle.They should both just snap in on both ends.Good luck.
I didn`t realize the part on the window was missing.Here is what you can do.Go to the dealership and tell them what you have and what your looking for.They will show you a picture and can order the part for you,or if you want you can go to a salvage yard and get them from a used vehicle now that you know what it looks like.Good luck.
×
475 views
Usually answered in minutes!
I got the piston supports from the auto part store, and they guy didn't know what to use to connect it to my window. the bottom just snaps onto a a post with a ball, the top that connects to my window has two round holes about a quarter inch apart where the eye of the post fits in between. However, when I bought the car it didn't have any supports so i'm missing the part to connect it to the window. it looks like just a nut and bolt would work, but I want to make sure that that would be sufficient. Thanks again.
×