An expert who has achieved level 3 by getting 1000 points
An expert that got 20 achievements.
An expert that got 10 achievements.
An expert that got 5 achievements.
Re: The blinkers and brake lights on my daewoo Lanos not...
Hello. As you know, this car was only made for six years by the Korean automaker. For some if not all of these cars the flasher is behind the instrument cluster. It is accessible through an access panel on the side of the dash by the driver's door. The flasher is most likely green on a violet block.
That said, in addition to the flasher being a possible culprit I would also suspect a relay, and a poor ground wire. Trace the ground wire from these lights to the frame of the car and make sure you have a good solid connection, with no corrosion. If the contact point is corroded relocate the ground screw and make sure that you have scraped and sanded the spot so you are contacting bare, clean metal.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
It could be one of three things, the bulbs could have burnt out only for the brake filament...replace a bulb and check.
There is a sensor under the brake pedal that turns those lights on..that could be broken, it looks like a button.
Could also be a fuse, but thats the least likely.
more than likely u have a bad flasher. to use it in the meantime, do this: push the lever just enuff to see the arrow flashing (before it starts buzzing), then hesitate briefly and slowly move the lever into the full position. or if u prefer u can hold the lever at the flash until your turn is made.
Here is some extra information on replacing the Daewoo Lanos indicator / hazard lights relay. Open the driver door, on the side of the dashboard there is an access panel. Flip it open with a screwdriver. Now you can pull out a violet connector block. The relay is plugged into this block, it is green. You can just pull it out of the connector block and replace it by a new one. The part number is 96312545, and it has three pins, numbered 31, 49 and 49A. Other specifications: 12V 2/4x21W. It is made by Daewoo / DECO. The same type of relay is used in the Daewoo Matiz. I picked up a used relay from an old Matiz for 2 euros and the indicator/hazard lights work like a charm again. The whole replacement took about 2 minutes, but it took me days to get the used part. Probably other relays with these three pins will work too: google for "31 49 49A". Hope this is useful to other people who run into problems with the Daewoo Lanos indicator lights!
its the rotors are warped .. if you are saying when applying the brakes they are jerking in the pedal right ?/ its the rotors are warped and need replaced if this is what you are asking .. your abs should be ok i think its rotors ..