WHAT FUSE AND RELAY CONTROL TURN SIGNALS
The turn signal flasher assembly is located under the driver's side of the instrument panel, on the front of the fuse panel, or under the center section of the instrument panel in the relay/flasher block. This is ,basically, the controller for your turn signals.
Click here to view a picture of the flasher switch.
SOURCE: no turn signals but flashers work
You may have two relays one for hazards and one for turn indicators.
SOURCE: My turn signals are NOT working, but emergency
Check for the FLASHER. For 1991 Toyota Truck Pickup 4WD (4 cyl) 2.4L FI 4cyl the Flasher is located front seating area, driver side, under dash, mounted driver side of steering column.
Hope this helps.
Hi,
If I understand you right based on your post/description, the signal lights would still turn on even if any or both of the flasher relays are removed. Should this be the case, then the signal lights are not getting the power from the flasher relays but from the brake light circuit.
Perhaps your concern is not with any of the flasher, but simply missing or loose ground more particularly with the rear lights. Perhaps you could try determining which of the wires for the brake lights and signal lights (as they come out of the light assembly) would be ground . A test and even possibly a temporary workaround is to hard wire a second ground connection from the determined ground wire of the lights and attach it to any conveniently located bolt or screw to the body. it may be to your advantage to do this on all the rear lights assembly.
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.
Good luck and kind regards. Thank you for using FixYa.
1,092 views
Usually answered in minutes!
I have already replace fuses and flasher relay under the dash, and still nothing works
×