Question about 1996 Jeep Cherokee Country

1 Answer

I have a 1996 Jeep Cherokee Classic. My Tachometer, Fuel Gage, and Speedometer quit working a few months ago. The Oil pressure,and Temperature gages work fine. All fuses are fine. I suspect a grounging problem but donot know the source for the ground for these gages. I have not installed any new equipment. The gages worked intermitently for a month of so before they quit all together I have tried replacing the gage cluster with a known working one, same problem still exists.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,985 Answers

Have you tried working on one problem at a time?
have you check the body computer for any codes?
and to also verify the bus line is ok.
if you find nothing wrong with BCM or bus,
try checking the speed sensor for an output signal or if the gear is bad.

Posted on Nov 25, 2009

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My speedometer tack fuel Gage temperature Gage quit working but dash lights work


What make , model an year vehicle ? If a GM vehicle 2003 to 2006 stepper motors in the instrument cluster are bad .
How to repair GM Instrument Cluster Speedometer Gauge Stepper

Oct 20, 2017 | Cars & Trucks

1 Answer

I have a 97 grand cherokee larado and when I shut it off it won't start back up for a few mins..then it fires up...is there a kill switch on it or something else wrong possibly


No kill switch. You may have a fuel pump pressure issue, it may being losing pressure after shut down due to a faulty fuel pump check valve. Do a fuel pressure leakdown test, start the engine with a fuel pressure test gage hooked to the test port on the fuel supply rail to the fuel injectors, looks like a tire valve. Start the engine and run it and check for leaks at the pressure port to the test gage, repair as needed, once you are sure the test gage is leak free shut the engine down, if the fuel pressure bleeds down very quickly then you need to replace the fuel pump.

Apr 12, 2017 | 1997 Jeep Grand Cherokee

1 Answer

GAGES QUIT


Check the connections on the back of the instrument cluster. It sounds like you have a faulty instrument cluster board, a poor connection and perhaps, but less likely, an ECU issue.

Nov 04, 2012 | 1995 Eagle Vision

1 Answer

When I go to crank 2000 jeep Cherokee limited the fuel gage works sometimes and it will only run for about three seconds what's wrong?


The computer grounds the fuel pump relay for 3 seconds to boost fuel pressure on start-up. If the computer does not see oil pressure or RPM it will not continue to ground the relay.
You would need to bypass the relay and see if the pump continues to run, then check the relay and the ground signal from the computer.
The gas gauge problem may be connected or something different.
The connector at the gas tank may be faulty which would affect both the power for the pump and the fuel gauge sending unit.

Sep 21, 2012 | 2000 Jeep Cherokee

1 Answer

I cannot read if there is any fuel in the tank,how do i repair and also can you quote me how much would anyone typically pay to fix this problem. also my speedometer does not work either but all the lights...


There are a few issues the gage not working could be, a bad fuel sender, a bad gage or a sort in the wires.

The speedometer is most likely a bad cable at 1 end or the other or the gear at the transmission. Or the speedo cluster itself is stripped.

Apr 18, 2010 | 1996 Jeep Cherokee Country

2 Answers

My two thousand jeep starsts then shuts off engine light comes on check gages what are the gages


You probably recently had a new key made, and the Jeep ignition is chipped. The key has a sensor, and must be programmed to match the ignition. Some will start till you put it in gear, then it shuts off.

Nov 17, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Clueless Jeep Owner


If the Jeep is making noise when the oil pressure is low, what you might be hearing is the valves or lifters. Take the Jeep to a mechanic and have it looked at before it gets worse and a small repair could turn into a big one.

Jun 15, 2009 | 1996 Jeep Grand Cherokee

3 Answers

Oil pressure gage at zero when engine is running on my 1999 jeep grand cherokee v8. plenty of oil in engine


if the engine is running normal and there are no odd sounds from engine. probably needs oil pressure switch or bad connection at switch. any ticking noises and i would have pressure checked with guage

Nov 27, 2008 | 1996 Jeep Grand Cherokee

1 Answer

96 jeep grand cherokee limited


can you tell me if you have problems starting the vehicle?

Aug 28, 2008 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1996 Jeep Cherokee Country Logo

446 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

Marvin
Marvin

Level 3 Expert

85216 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jonah Oneal

Level 3 Expert

14092 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...