-
Expert
97 Answers
- Posted on Nov 15, 2009
Re: Diagram on to change turn signal arm on 1994 chevy...
1991-94 Cavalier
See Figure 5
This procedure covers removal and installation of the headlamp, headlamp dimmer switch, turn signal and hazard switches, as well as the cruise control switch.
- If equipped, disable the SIR system. For details, please refer to the procedure located in of this repair guide.
Fig. Fig. 5: View of the steering column showing the turn signal switch location
- If not already done, disconnect the negative battery cable.
- Unfasten the horn pad, then remove the steering wheel. For details, please refer to the procedure earlier in this section.
If necessary, using locking pliers with a piece of rubber (such as a spark plug boot) between the jaws to help prevent damage to the tilt lever during removal.
- If equipped, remove the tilt lever from the steering column by grasping the lever firmly and twisting counterclockwise, while pulling it from the column.
- Remove the upper and lower steering column covers.
- Remove the dampener assembly, then unfasten and remove the switch assembly from the vehicle.
To install:
- Position and secure the switch assembly.
- Install the dampener and the upper and lower steering column covers.
- If equipped, attach the tilt lever to the column.
- Install the steering wheel, then fasten the horn pad.
- If equipped, enable the SIR system, as outlined in of this repair guide.
- Connect the negative battery cable.
×