the 75 may work but the belt may be loose if the tensioner doesnt pick up the slack, i dont understand, you said this was not an aftermarket part so its a dealer part, sre you sure you are asking for the right pulley,okay i just looked at a diagram and theres only one pulley and thats for the tensioner theres no idler pulley on the v6 engine i think thats why you are getting the wrong part.heres a diagram to show you, maybe ask for the tensioner pulley.i jsut looked up part and the pulley i looked at was 76mm ,you can also buy the whole tensioner asm, but if its just the pulley you need then that doesnt make sense,try to put the belt on and see if its tight is so use it, i often run into this problem and thats what i do, but im confused that the dealer cant get the part right, something isnt right, you know i just looked at the measurements and that not right, i have never seen a pulley that big on the tensioner, i think its another pulley, like for the power steering,look at the diagram i sent and i will label each pulley and see if it the same one you are looking for, i think you will find its not the tensioner pulley and you dont have an idler so its another pulley good luck i hope this helps,
×