At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
www.autozone.com/brakes.../brake-pressure...switch/...brake-p... AutoZoneShop for Duralast/Brake Pressure Warning Switch PS184 with confidence atAutoZone.com. Parts are just part of what we do.
It is impossible to replace have the dealer do it for 85 dollars. It is just above the oil filter between two other things and it is easy to replace if you rip the connector off instead of taking it off right. It took a repair shop 6 hours to replace it when I couldn't and it cost me 70 dollars money well spent. They told me 15 minutes
In the solenoid pack. Look down between the radiator and transmission. The solenoid pack is right there. Big electrical plug going to it. Clean it and around it well before replacing it. You get dirt in the holes after you remove it. You may have to pull the valve body and clean it.
The MAP sensor on the Chrysler Conquest is located either on the passenger side or the driver side down around knee level. The Manifold Absolute Pressure sensor (MAP sensor) is one of the sensors used in an internal combustion engine's electronic control system.------------------------------------------------------------------------------------- Car Key Programmers
as you are standing in front of car on left side behind air filter is a receiver alum canister with a cap on top this is the high pressure side just below the receiver and under the firewall you will see a cap this is the low pressure or fill valve
It is for an oil change mainly and any other service your maintenance manual suggests at the mileage interval. It needs to be reset after each oil change to be accurate.
×