At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
GM trucks are prewired foe 4 wire trailer harness go to Autozone or other parts house and you can buy a direct plug in harness. GM just tapes the connector around the rear area near bumper on the harness.
Look in your glove box and see if you have the PRO code U89: wiring harness, car trailer
It's common to have the trailer harness already installed in your Silverado without you know and the dealer can pull it out for you from where it's tucked up in the frame passenger side by the spare tire for the simple cost or $65.00.
http://www.etrailer.com/tv-wiring-install-2006-chevy-silverado.aspx
Thank you for using fixya and good luck.
There usually is not a diagram for this type of wiring, as it's wired directly into the current wires. You simply need to follow the wires on the truck (if doing the plug here) and run the wiring to these as needed per light.
If you are wiring the trailor - the new wiring harness should be color coded as well as labeled (if new) for each light. Trace the wires (if attached still) and attach each wire as necessary to it's appropriate light.
I have never personally heard of wiring diagrams for this, at least not for aftermarket wiring. Any other diagrams for wiring can be found in a service manual for your truck.
Please let me know if you need further assistance with this matter.
don't sweat it. hook the wires up. If it is wired wrong the speaker will pulse outward toward the door. If wired properly they will pulsate inward towards the interior of the vehicle. You can veify the speakers movement visully or by placing your hand over the speaker. Enjoy your new speakers.
×