Question about 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Trying to find out how much oil the Triton V-10 takes when I do my oil change? I cant seem to find it or anyone who knows

Posted by mudntires23 on

Ad

2 Answers

Harvey N Tawatao

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Ford Master
  • 3,854 Answers

2000 FORD TRUCKS F250 HD PICKUP 6.8L 10-cyl Engine Code

Engine Oil: All TEMPS......5W-20
Controlled Slip Differential, Rear Dana 80. ALL TEMPS......75W-90
Standard Differential, Rear Dana 80. ALL TEMPS......75W-90
Standard Differential, Rear Dana 135 ALL TEMPS......80W-90
Controlled Slip Differential, Rear Ford. ALL TEMPS......75W-140
Standard Differential, Rear Ford.. ALL TEMPS......75W-140
Controlled Slip Differential, Rear Dana 135 ALL TEMPS......80W-90
Differential, Front......GL ALL TEMPS......75W-90

CAPACITIES:
Engine, with filter..........5.7 liters
Cooling System, Initial Fill..........29 liters
Automatic Transmission, 4R100 Initial Fill..........6.1 liters
Automatic Transmission, Total Fill 4 speed 26 Plate 4R100..........16.7 liters
Manual Transmission, 5-SPD Mazda..........3.6 liters
Manual Transmission, 5-SPD ZF..........3.2 liters
Manual Transmission, 6-SPD W/ OCOOL..........6 liters
Differential, Front..........2.8 liters
Differential, Dana 50 Front..........1.8 liters
Differential, Dana 60 Front..........2.7 liters
Differential, Dana 135 Rear..........11 liters
Differential, Dana 80 Rear..........4 liters
Differential, Ford 10.5 Ring Gear Rear..........3.3 liters
Transfer Case, ..........1.9 liters


TORQUES:
Oil Drain Plug.....17 ft/lbs
Manual Transmission
Fill Plug 25-30 ft/lbs
Drain Plug 25-30 ft/lbs
Transfer Case NV271
Fill Plug 20 ft/lbs
Drain Plug 20 ft/lbs


Just a few information that should help you. Good luck

Posted on Nov 08, 2009

Ad

Anonymous

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

It should be listed in the owners manual, but because of different oil cooler setups you may have to do the change yourself and add oil until the correct level is established..... for the first oil change.
Most likely 7 liters,but start with 5,run the engine to fill the oil filter,let it sit for 5 mins and recheck and fill to full.
Note the amount needed for next time.

Posted on Nov 08, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ford f53 triton. wrench light came on at 40004 miles. Suspect oil change reminder. will disconnecting battery clear it?


Wrench light has nothing to do with a oil change . Could be transmission problem or electronic throttle control , Take an have vehicle scanned for DTC'S - diagnostic trouble codes .
Ford f53 triton ????? Ford what ? f-150 with 5.4 l triton engine ? What year ?

Jun 21, 2018 | Ford Cars & Trucks

2 Answers

How many quarts of oil for a Triton V10 6.8 engine?


If I remember correctly it takes 7 Quarts.

Aug 18, 2014 | Cars & Trucks

1 Answer

Does anyone know of a great place where I can get an oil change for my brand new BMW M3 Sedan?


if i had new bmw i would let only the bmw dealership change oil and service the car period, bmw is a very expensive car every body cant work on them.let dealership do the oil change they the only ones can reset your oil service light,its not easy to reset if you dont know how. most of the time if you have new vechicle the place where you bought the car will cut you a oil change deal.

Nov 26, 2011 | 2011 BMW M3

2 Answers

I just recently changed the Timing chain, Tensioner, chain guide, and top crank. When i start the truck the chain still clatters. I took off the Valve cover checked the guide, turned the pulley 360 deg....


i have had this problem with a ford scorpio 2.0 engine (euroepon model) and no matter what i done the adjuster would not come out and the timing kept jumping as the chain went slack ,so i improvised and made a spring to fit on the adjuster and the other end to the top of the cam shaft housing ,fitted rocker cover started engine and after a couple of minutes of running the oil pressure had built up in the adjuster mechanism .removed the spring and its been running ever since over 2 yrs now .Iam wondering how they do it in the factory on the assemble line perhaps the adjusters are pre filled with oil who knows

May 02, 2011 | 1997 Nissan Pickup

1 Answer

Oil Change proceedure. Where is the oil pan drain


The drain plug will be at the lowest part of the oil pan. I would recommend you take it to a shop, if you cant seem to find it. If its not right, you can damage the engine, and thats a pretty big price for trying to save a few bucks.

Nov 13, 2009 | 2002 Dodge Sprinter

3 Answers

Shifting problems


Change the transmission oil and filter, and the speed control sensor.

Jun 04, 2009 | 2000 Mercury Cougar

2 Answers

Audi a6 quattro 1999 flashing oil sign & beeping


When is the last time you got an oil change? Did they reset the system? The light may be trying to let you know you know you need an oil change,

May 14, 2009 | 2005 Audi A6

1 Answer

How long to change the engin in 2000 expedition XLP WITH 4X4


it takes about 5 to 10 hours to change it out.

Feb 22, 2009 | 2000 Ford Expedition

5 Answers

2002 Jeep Liberty oil pressure light comes on in cold


Chrysler mounted the oil sensing unit on these motors directly above the oil filter. It is very easy to accidently hook the sensing unit with the oil filter wrench and crack or break it. For anyone whose oil light problem developed right after an oil change, this may be the problem. To change the unit, pry up the plastic retaining clip with a screw driver and unplug the wire harness. If the plastic part of the sensor is broken, (or if you break it to facilitate easy removal), you can remove the sensor with a 27mm socket. Once you have removed it, use a piece of CLEAN pipe cleaner to insure the hole isn't plugged with sludge which could also cause the oil light to come on. Screw in the new unit finger tight, then snug up with a WRENCH. You cannot use the socket to tighten it as it would damage the plastic part of the new sensor. Plug the wire harness back on, then start the engine to make sure it doesn't leak oil around the new unit.

Oct 28, 2008 | 2002 Jeep Liberty

1 Answer

Transmission Fluid Looks "Bad"?


you just need the fluid change im sure its probably dark and every oil changer makes it sound bad!! just get it serviced new fluid and tranny filter if equipped although if theres tons of miles on the fluid dont change it because theres a possibility that it wont ever shift again and thats around 125K

Sep 17, 2008 | 2002 Chevrolet Trailblazer Ext

Not finding what you are looking for?
2000 Ford F250 Super Duty Crew Cabs Logo

685 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...