It takes a ball joint press which can be purchased at harbor freight. you should purchase "moog problem solvers". they are your best bet for trouble free repairs.
Testimonial: "That means alot thank you!"
Sand the insides of the control arm and lightly sand the groves on the new ball ball joint.grease both,place ball joint in the freezer,have press tool ready,grease threads on press tool,make sure it is lined up properly ,if not it will never go in.last resort ,take half round med.file and file groves in control arm.it would go a lot easy er.be careful not to remove too much,just the grooves.hope this helps.
This requires special tools as the ball joints are press fit
SOURCE: Changing front ball joints on Dodge 2500 2005
can it not be done without removing the hub ?? dont think you can get hub off without removing the track control ball joint?do you have the right tools??
1,436 views
Usually answered in minutes!
×