Question about 1998 Oldsmobile Silhouette

1 Answer

Need to put a camshaft position sensor on a 98 oldsmoblie silhouette, where is it on the motor?

Posted by Anonymous on

Ad

1 Answer

Mark Lewis

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 105 Answers

Remove your Distributor Cap and Rotor button, and the black domed looking thing under the rotor button is your Camshaft sensor. It should have three to four wires sticking out of the distributor connected to the wiring harness fairly close to the distributor.

"00 Buck"

Posted on Nov 06, 2009

Testimonial: "Thanks will try what you suggested."

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replace camshaft position sensor ?


need more information since each manufacturer puts the sensor in different spots --generic answer --the following link shows different vehicles sensors being replaced
How to replace camshaft position sensor in your vehicle Camshaft Position Sensor Replacement Replace Camshaft Position Sensor Yahoo Video Search Results

Aug 31, 2016 | Cars & Trucks

1 Answer

Camshaft position sensor 98 Tahoe


Camshaft sensor is located in the distributor.
just remove the cap and rotor, disconnect the electrical plug at the back of the distributor that plugs in to the CMP
(camshaft position sensor) two screws holding it down.

Dec 21, 2014 | Cars & Trucks

1 Answer

What does code p 344 mean


P0344 Dodge - Camshaft Position Sensor Intermittent Interruption Bank 1 Sensor 1

Possible causes
- Faulty Camshaft Position Sensor
- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery

Jul 16, 2014 | Chrysler Town & Country Cars & Trucks

1 Answer

Camshaft position sensor


I put a 2000 3.2 litre engine in a 98 Isuzu rodeo now having trouble with camshaft position sensor computer told me that's the problem I know where it goes but it's blocked off, rodeo not running perfect, what to do or can I bypass it

Jan 01, 2014 | 2003 Mini Cooper

1 Answer

98 caravan 2.4 0340error code


P0340 DODGE - Camshaft Position Sensor Circuit Bank 1 Sensor 1

Possible causes- Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Faulty starter motor
- Starting system circuit
- Dead (Weak) battery Tech notes Sometimes and in some models, low battery voltage or a weak starter can can trigger a Camshaft Position Sensor code, also a loose worn cam belt can cause this code. Has the belt ever been replaced?.

Oct 10, 2012 | Dodge Caravan Cars & Trucks

1 Answer

Whats the position of the crankshaft position sensor on 2005 pt cruiser non turbo


P0344 CHRYSLER - Camshaft Position Sensor Intermittent Interruption Bank 1 Sensor 1
Possible causes - Camshaft Position Sensor harness is open or shorted
- Camshaft Position Sensor circuit poor electrical connection
- Faulty Camshaft Position Sensor
- Faulty starter motor
- Starting system circuit

Dec 14, 2011 | 2005 Chrysler PT Cruiser

2 Answers

My fans on my 2002 oldsmoblie silhouette van will not come on, my van is overheating. Thermostat is fine, water pump is fine, fuses are good.


Is there power reaching the fans? If yes, the fan motors are no good. If no, it could be a faulty fan relay. Try turning on the AC...If the fan now works, you have an issue in the electrics.

Aug 21, 2011 | 2000 Oldsmobile Silhouette

2 Answers

98 silverado 5.7L camshaft position sensor


ITS ABOVE CRANKSHAFT PULLEY.IT CONNECTS WITH CRANKSHAFT POSITION SENSOR.

Oct 23, 2009 | Chevrolet Silverado 1500 Cars & Trucks

1 Answer

No fire to coil from coil on 96 model Jeep Grand Cherokee.


You need to put the harmonic balance for the 96 jeep on this motor,then put the crankshaft sensor on for the 96 jeep on the vehicle,this should fix you up.The crankshaft sensor and the harmonic balance have to go together.If I can be further help,let me know.>>[email protected]

Aug 18, 2009 | 1996 Jeep Grand Cherokee

Not finding what you are looking for?
1998 Oldsmobile Silhouette Logo

Related Topics:

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Joe Taylor
Joe Taylor

Level 3 Expert

2228 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...