I have a 2003 Coachmen Freedom Class C. I want to install scissor jacks (for stability) on this vehicle. Anybody had this done on a class c. Where did you locate them?
I have a Coachman "Road Trec" class C and I installed my scissor jacks near the frame member for the front just to the rear of the bumper. I installed a length of angle iron from the left frame rail to the right frame rail then installed the jacks on the angle iron as close to the frame a possible.
On the rear I cut a piece of 3 " angle iron and bolted it to the outside of the frame then mounted the jack on the angle iron for each side.
357 views
Usually answered in minutes!
×