Need to know how to remove starter from 1991 dodge caravan

E


Starter motor mounting-2.2L and 2.5L engines

- Working from under the vehicle, disconnect the starter motor heat shield clamp

View of the starter motor with the heat shield removed while looking over the crossmember

- Removing the starter motor mounting stud nut where the air pump tube bracket is also attached

1. Disconnect the negative battery cable.
2. Raise and safely support the vehicle. The starter can be removed by reaching over the crossmember.
3. Remove the heat shield and its clamps, if so equipped.
4. On the 2.2L and 2.5L engines, loosen the air pump tube at the exhaust manifold and move the tube bracket away from the starter.
5. Remove the electrical connections from the starter.
6. Remove the bolts attaching the starter to the flywheel housing and the rear bracket to the engine or transaxle.
7. Remove the starter from the engine.

1. Position the replacement starter against the mounting surface.
2. Install the mounting bolts.
3. Connect the starter wiring.
4. On 2.2L and 2.5L engines, position the air pump tube toward the starter, then connect the tube bracket to the exhaust manifold.
5. Install the heat shield and clamp.
6. Connect the negative battery cable.