Question about 1998 Chevrolet Venture Cargo
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.
Posted on Nov 03, 2009
I have a 98 chevy venture, there is no vacuum inside to switch from floor to vents, how do i fix this?
Posted on Nov 12, 2009
Tips for a great answer:
Apr 30, 2018 | 2004 Chevrolet Venture Passanger
Jan 17, 2014 | 2004 Chevrolet Venture Passanger
Aug 09, 2017 | Chevrolet Cars & Trucks
Jun 05, 2011 | 2004 Chevrolet Venture Passanger
May 14, 2011 | 2001 Chevrolet Venture
Mar 27, 2010 | 2003 Chevrolet Venture Passanger
Jul 30, 2008 | 1997 Chevrolet Venture
5,782 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: